Stark County, OH Elevation & Topographic Map

Elevation
1,350 ft 410 m1,230 ft 375 m1,180 ft 360 m1,060 ft 325 m940 ft 290 m890 ft 270 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Stark County averages about 1,110 ft (335 m) above sea level across all its land. Its ground runs from 890 ft on the south side to 1,350 ft on the east side.
Average elevation
1,110 ft 335 m
all land inside the county
Highest
1,350 ft 410 m
on the east side
Lowest
890 ft 270 m
on the south side
Stark County spans about 460 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 1,110 ft335 m |
| Highest point Inside the county, on the east side | 1,350 ft410 m |
| Lowest point Inside the county, on the south side | 890 ft270 m |
Elevation profile, west to east
29 mi west to east through Canton.
Topographic Map
- Location
- County in Ohio, United States
- Population
- 374,091 2024 est.
- Land area
- 574.9 sq mi + 5.3 sq mi water
- Density
- 651 per sq mi
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Appalachian Plateaus
- Drains to
- Gulf of America 96%
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Columbiana County1,140 ft
- Carroll County1,130 ft
- Stark County1,110 ft
- Portage County1,100 ft
- Mahoning County1,090 ft
- Holmes County1,090 ft
- Wayne County1,080 ft
- Summit County1,040 ft
- Tuscarawas County1,020 ft
Rankings by average elevation
- Counties in Ohio11th highest of 88
- Counties in the United States1,236th highest of 3,151
Peaks and hills highest inside
- Sponsellers Hill1,270 ft
- Weimers Hill1,170 ft
All 49 towns in Stark County by typical elevation
- Harrisburg, Stark County1,260 ft
- Washington Township, Stark County1,230 ft
- Alliance1,180 ft
- Greentown1,180 ft
- Hartville1,170 ft
- Marlboro1,170 ft
- Lake Township1,160 ft
- Nimishillen Township1,160 ft
- Middlebranch1,150 ft
- East Canton1,140 ft
- Osnaburg Township1,140 ft
- Marlboro Township1,140 ft
- Louisville1,140 ft
- Uniontown1,130 ft
- North Canton1,130 ft
- Plain Township1,120 ft
- Paris Township, Stark County1,120 ft
- Meyers Lake1,120 ft
- Richville1,110 ft
- Hills and Dales1,110 ft
- Tuscarawas Township1,100 ft
- Jackson Township, Stark County1,100 ft
- Canton1,100 ft
- Limaville1,100 ft
- Reedurban1,090 ft
- Canton Township1,090 ft
- Rose Township partly1,090 ft
- Perry Township1,090 ft
- Robertsville1,090 ft
- Perry Heights1,080 ft
- Lexington Township1,070 ft
- Bolton1,060 ft
- Pike Township, Stark County1,060 ft
- Minerva1,060 ft
- North Industry1,060 ft
- Wilmot1,030 ft
- Massillon1,030 ft
- North Lawrence1,020 ft
- Sugarcreek Township, Stark County1,000 ft
- Lawrence Township1,000 ft
- Beach City1,000 ft
- Waynesburg990 ft
- Sandy Township990 ft
- Canal Fulton990 ft
- Brewster990 ft
- Bethlehem Township990 ft
- Magnolia980 ft
- East Sparta980 ft
- Navarre960 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.