Columbiana County, OH Elevation & Topographic Map

Elevation
1,440 ft 440 m1,240 ft 380 m1,150 ft 350 m950 ft 290 m760 ft 230 m660 ft 200 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Columbiana County averages about 1,140 ft (350 m) above sea level across all its land. Its ground runs from 660 ft on the southeast side to 1,440 ft on Round Knob.
Average elevation
1,140 ft 350 m
all land inside the county
Highest
1,440 ft 440 m
on Round Knob
Lowest
660 ft 200 m
on the southeast side
Columbiana County spans about 780 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 1,140 ft350 m |
| Highest point Inside the county, on Round Knob (3DEP terrain model; no NGS survey height) | 1,440 ft440 m |
| Lowest point Inside the county, on the southeast side | 660 ft200 m |
Elevation profile, south to north
23 mi south to north through Perry Township, Columbiana County.
Topographic Map
- Location
- County in Ohio, United States
- Population
- 99,823 2024 est.
- Land area
- 531.9 sq mi + 2.8 sq mi water
- Density
- 188 per sq mi
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Appalachian Plateaus
- Drains to
- Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Columbiana County1,140 ft
- Carroll County1,130 ft
- Stark County1,110 ft
- Lawrence County, PA1,100 ft
- Mahoning County1,090 ft
- Jefferson County1,080 ft
- Beaver County, PA1,070 ft
- Hancock County, WV1,050 ft
Rankings by average elevation
- Counties in Ohio4th highest of 88
- Counties in the United States1,188th highest of 3,151
Peaks and hills highest inside
- Round Knob1,440 ft
- Blackburn Hill1,270 ft
- Bliss Hill1,200 ft
All 42 towns in Columbiana County by typical elevation
- Butler Township, Columbiana County1,260 ft
- Salem1,260 ft
- Perry Township, Columbiana County1,250 ft
- Damascus partly1,230 ft
- Salem Heights, Columbiana County1,230 ft
- Hanover Township, Columbiana County1,190 ft
- West Township1,170 ft
- Elkrun Township1,160 ft
- Lake Tomahawk1,160 ft
- Guilford Lake1,160 ft
- Homeworth1,160 ft
- Hanoverton1,150 ft
- Knox Township, Columbiana County1,150 ft
- Wayne Township, Columbiana County1,150 ft
- Glenmoor1,150 ft
- St. Clair Township1,150 ft
- La Croft1,150 ft
- Madison Township, Columbiana County1,150 ft
- Salem Township, Columbiana County1,140 ft
- Franklin Township, Columbiana County1,140 ft
- Calcutta1,140 ft
- Fairfield Township, Columbiana County1,140 ft
- Summitville1,130 ft
- Liverpool Township, Columbiana County1,130 ft
- Columbiana1,120 ft
- Yellow Creek Township1,110 ft
- Middleton Township, Columbiana County1,110 ft
- East Rochester1,100 ft
- Center Township1,090 ft
- Washingtonville1,090 ft
- Unity Township1,080 ft
- New Waterford1,080 ft
- Minerva partly1,060 ft
- Leetonia1,050 ft
- Rogers1,030 ft
- East Palestine1,030 ft
- Washington Township, Columbiana County1,030 ft
- Lisbon1,010 ft
- Salineville980 ft
- East Liverpool960 ft
- Negley850 ft
- Wellsville690 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.