Bolton, OH Elevation & Topographic Map

Elevation
1,090 ft 335 m1,080 ft 330 m1,070 ft 325 m1,050 ft 320 m1,030 ft 315 m1,020 ft 310 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official CDP boundary (US Census).
Elevation Data
Bolton sits at about 1,060 ft (325 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
1,060 ft 325 m
most residents: 1,050–1,070 ft
Lowest
1,020 ft 310 m
on the northwest side
Highest
1,090 ft 335 m
on the southwest side
Average
1,050 ft 320 m
all land inside the CDP boundary
Bolton spans about 70 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 1,060 ft325 m |
| Highest point Inside the CDP boundary, on the southwest side | 1,090 ft335 m |
| Lowest point Inside the CDP boundary, on the northwest side | 1,020 ft310 m |
| Town center USGS map point for Bolton | 1,050 ft320 m |
| Average of all land | 1,050 ft320 m |
Elevation profile, west to east
1.0 mi west to east through the town center.
Topographic Map
- Location
- Unincorporated community (census-designated place) in Stark County, Ohio, United States
- Population
- 654 2020 Census
- Land area
- 0.8 sq mi
- Density
- 864 per sq mi
- Coordinates
- 40.9398° N, 81.1151° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Appalachian Plateaus
- Drains to
- Mahoning River → Ohio River → Mississippi River → Gulf of America
- ZIP codes 1
- 44601
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Washington Township, Stark County1,230 ft
- Alliance1,180 ft
- Marlboro1,170 ft
- Marlboro Township1,140 ft
- Maple Ridge1,110 ft
- Sebring1,100 ft
- Smith Township1,100 ft
- Limaville1,100 ft
- Lexington Township1,070 ft
- East Alliance1,070 ft
- Bolton1,060 ft
Rankings by typical elevation
- Towns in Ohio523rd highest of 2,572
- Towns in Stark County31st highest of 48
Peaks and hills nearest, by height
- Blackburn Hill1,270 ft
- Bacon Hill1,230 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Bolton is an unincorporated community; figures cover the census-designated place, a statistical area.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.