North Industry, OH Elevation & Topographic Map

Topographic elevation map of North Industry, Ohio, shaded from 980 ft on the southeast side to 1,240 ft on the west side
Elevation
1,240 ft 380 m1,170 ft 360 m1,140 ft 350 m1,070 ft 325 m1,010 ft 305 m980 ft 295 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Area
Fades everything outside the official CDP boundary (US Census).

Elevation Data

North Industry sits at about 1,060 ft (320 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation
1,060 ft 320 m
most residents: 1,010–1,150 ft
Lowest
980 ft 295 m
on the southeast side
Highest
1,240 ft 380 m
on the west side
Average
1,090 ft 330 m
all land inside the CDP boundary

North Industry spans about 260 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

FigureElevation
Typical
Where people live: half of residents higher, half lower
1,060 ft320 m
Highest point
Inside the CDP boundary, on the west side
1,240 ft380 m
Lowest point
Inside the CDP boundary, on the southeast side
980 ft295 m
Town center
USGS map point for North Industry
1,000 ft305 m
Airport (CAK)
FAA airport elevation, the highest point of its runways, 12 mi north of the CDP boundary
1,226 ft374 m
Average of all land1,090 ft330 m

Elevation profile, south to north

1.0 mi south to north through the town center.

Topographic Map

Topographic elevation map of North Industry, Ohio, shaded from 980 ft on the southeast side to 1,240 ft on the west side
CDP boundary (dashed) over shaded terrain, with contours every 20 ft (6 m).
Location
Unincorporated community (census-designated place) in Stark County, Ohio, United States
Population
1,528 2020 Census
Land area
2.0 sq mi
Density
772 per sq mi
Coordinates
40.7389° N, 81.3668° W
Time zone
Eastern UTC−5 / −4
Landform region
Appalachian Plateaus
Drains to
Tuscarawas River → Muskingum River → Ohio River → Mississippi River → Gulf of America
Airport
Akron-Canton Regional (CAK) 1,226 ft
ZIP codes 2
44706 44707
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

Nearby Places

Nearby towns by typical elevation

  1. East Canton1,140 ft
  2. Osnaburg Township1,140 ft
  3. Meyers Lake1,120 ft
  4. Richville1,110 ft
  5. Canton1,100 ft
  6. Reedurban1,090 ft
  7. Canton Township1,090 ft
  8. Perry Township1,090 ft
  9. Pike Township, Stark County1,060 ft
  10. North Industry1,060 ft
  11. East Sparta980 ft

Rankings by typical elevation

Peaks and hills nearest, by height

  • Sponsellers Hill1,270 ft
  • Weimers Hill1,170 ft
How we measure
  • Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • North Industry is an unincorporated community; figures cover the census-designated place, a statistical area.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.