Tuscarawas County, OH Elevation & Topographic Map

Elevation
1,370 ft 420 m1,220 ft 375 m1,150 ft 350 m1,000 ft 305 m860 ft 260 m780 ft 240 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Tuscarawas County averages about 1,020 ft (310 m) above sea level across all its land. Its ground runs from 780 ft on the southwest side to 1,370 ft on the west side.
Average elevation
1,020 ft 310 m
all land inside the county
Highest
1,370 ft 420 m
on the west side
Lowest
780 ft 240 m
on the southwest side
Tuscarawas County spans about 590 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 1,020 ft310 m |
| Highest point Inside the county, on the west side | 1,370 ft420 m |
| Lowest point Inside the county, on the southwest side | 780 ft240 m |
Elevation profile, south to north
31 mi south to north through New Philadelphia.
Topographic Map
- Location
- County in Ohio, United States
- Population
- 92,048 2024 est.
- Land area
- 567.6 sq mi + 4.0 sq mi water
- Density
- 162 per sq mi
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Appalachian Plateaus
- Drains to
- Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Carroll County1,130 ft
- Stark County1,110 ft
- Harrison County1,100 ft
- Holmes County1,090 ft
- Tuscarawas County1,020 ft
- Guernsey County950 ft
- Coshocton County950 ft
Rankings by average elevation
- Counties in Ohio26th highest of 88
- Counties in the United States1,368th highest of 3,151
Peaks and hills highest inside
- Elephant Knob1,240 ft
- Knob Hill1,230 ft
- Shulls Hill1,230 ft
- Colliers Hill1,210 ft
- Backus Knob1,190 ft
All 44 towns in Tuscarawas County by typical elevation
- Auburn Township, Tuscarawas County1,150 ft
- Jefferson Township, Tuscarawas County1,130 ft
- Wayne Township, Tuscarawas County1,100 ft
- Bucks Township1,090 ft
- Perry Township, Tuscarawas County1,090 ft
- Baltic1,070 ft
- Washington Township, Tuscarawas County1,060 ft
- Sugar Creek Township, Tuscarawas County1,060 ft
- Sugarcreek1,060 ft
- York Township, Tuscarawas County1,040 ft
- Warren Township, Tuscarawas County1,040 ft
- Fairfield Township, Tuscarawas County1,040 ft
- Union Township, Tuscarawas County1,040 ft
- Dundee1,030 ft
- Rush Township, Tuscarawas County1,020 ft
- Dover Township1,000 ft
- Sandy Township, Tuscarawas County990 ft
- Sandyville980 ft
- Mineral City980 ft
- Roswell950 ft
- Lawrence Township, Tuscarawas County950 ft
- Wilkshire Hills940 ft
- Franklin Township, Tuscarawas County940 ft
- Stone Creek940 ft
- Bolivar930 ft
- Parral920 ft
- Strasburg920 ft
- Zoar910 ft
- Dover910 ft
- Barnhill910 ft
- New Philadelphia900 ft
- Goshen Township, Tuscarawas County900 ft
- Salem Township, Tuscarawas County900 ft
- Midvale870 ft
- Dennison860 ft
- Mill Township860 ft
- Uhrichsville860 ft
- Warwick Township850 ft
- Tuscarawas850 ft
- Clay Township, Tuscarawas County850 ft
- Gnadenhutten840 ft
- Port Washington820 ft
- Oxford Township, Tuscarawas County800 ft
- Newcomerstown800 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 780 ft at 40.2615° N, 81.6199° W, is in such a hollow or patch and is not counted.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.