Belmont, OH Elevation & Topographic Map

Topographic elevation map of Belmont, Ohio, shaded from 1,070 ft on the northeast side to 1,260 ft on the southwest side
Elevation
1,260 ft 385 m1,210 ft 370 m1,190 ft 360 m1,140 ft 350 m1,090 ft 335 m1,070 ft 325 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Village area
Fades everything outside the official village limits (US Census).

Elevation Data

Belmont sits at about 1,200 ft (365 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation
1,200 ft 365 m
most residents: 1,170–1,220 ft
Lowest
1,070 ft 325 m
on the northeast side
Highest
1,260 ft 385 m
on the southwest side
Average
1,180 ft 360 m
all land inside village limits

Belmont spans about 190 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

FigureElevation
Typical
Where people live: half of residents higher, half lower
1,200 ft365 m
Highest point
Inside village limits, on the southwest side
1,260 ft385 m
Lowest point
Inside village limits, on the northeast side
1,070 ft325 m
Town center
USGS map point for Belmont
1,190 ft360 m
Airport (6G5)
FAA airport elevation, the highest point of its runways, 7.8 mi west of the village limits
1,312 ft400 m
Average of all land1,180 ft360 m

Elevation profile, south to north

0.6 mi south to north through the town center.

Topographic Map

Topographic elevation map of Belmont, Ohio, shaded from 1,070 ft on the northeast side to 1,260 ft on the southwest side
Village limits (dashed) over shaded terrain, with contours every 20 ft (6 m).
Location
Village in Belmont County, Ohio, United States
Population
402 2024 est.
Land area
0.3 sq mi
Density
1,511 per sq mi
Coordinates
40.0292° N, 81.0390° W
Time zone
Eastern UTC−5 / −4
Landform region
Appalachian Plateaus
Drains to
Ohio River → Mississippi River → Gulf of America
Airport
Barnesville/Bradfield (6G5) 1,312 ft
ZIP codes 1
43718
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

Nearby Places

Nearby towns by typical elevation

  1. Morristown1,280 ft
  2. Warren Township1,250 ft
  3. Bethesda1,240 ft
  4. Goshen Township, Belmont County1,220 ft
  5. Lloydsville1,210 ft
  6. Union Township, Belmont County1,210 ft
  7. Belmont1,200 ft
  8. Richland Township1,170 ft
  9. Smith Township, Belmont County1,170 ft
  10. Lafferty1,070 ft
  11. Bannock1,010 ft

Rankings by typical elevation

Peaks and hills nearest, by height

  • Galloway Knob1,397 ft
  • Chapel Hill1,360 ft
  • Hawthorn Hill1,350 ft
  • Clark Hill1,350 ft
  • Cool Hill1,290 ft
How we measure
  • Typical elevation: the population-weighted median: every 2020 Census block inside the village limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census village limits (TIGER, Jan 1 2026).
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones; NOAA NGS survey heights. All public domain.