Bannock, OH Elevation & Topographic Map

Topographic elevation map of Bannock, Ohio, shaded from 950 ft on the northeast side to 1,110 ft on the north side
Elevation
1,110 ft 340 m1,070 ft 325 m1,050 ft 320 m1,010 ft 310 m970 ft 295 m950 ft 290 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Area
Fades everything outside the official CDP boundary (US Census).

Elevation Data

Bannock sits at about 1,010 ft (310 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation
1,010 ft 310 m
most residents: 980–1,020 ft
Lowest
950 ft 290 m
on the northeast side
Highest
1,110 ft 340 m
on the north side
Average
1,030 ft 315 m
all land inside the CDP boundary

Bannock spans about 160 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

FigureElevation
Typical
Where people live: half of residents higher, half lower
1,010 ft310 m
Highest point
Inside the CDP boundary, on the north side
1,110 ft340 m
Lowest point
Inside the CDP boundary, on the northeast side
950 ft290 m
Town center
USGS map point for Bannock
1,000 ft305 m
Average of all land1,030 ft315 m

Elevation profile, south to north

0.8 mi south to north through the town center.

Topographic Map

Topographic elevation map of Bannock, Ohio, shaded from 950 ft on the northeast side to 1,110 ft on the north side
CDP boundary (dashed) over shaded terrain, with contours every 20 ft (6 m).
Location
Unincorporated community (census-designated place) in Belmont County, Ohio, United States
Population
159 2020 Census
Land area
0.3 sq mi
Density
537 per sq mi
Coordinates
40.0987° N, 80.9770° W
Time zone
Eastern UTC−5 / −4
Landform region
Appalachian Plateaus
Drains to
Ohio River → Mississippi River → Gulf of America
ZIP codes 2
43950 43972
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

  1. Morristown1,280 ft
  2. Flushing1,240 ft
  3. Lloydsville1,210 ft
  4. Union Township, Belmont County1,210 ft
  5. Flushing Township1,210 ft
  6. Belmont1,200 ft
  7. St. Clairsville1,190 ft
  8. Richland Township1,170 ft
  9. Wheeling Township1,100 ft
  10. Lafferty1,070 ft
  11. Bannock1,010 ft

Rankings by typical elevation

Peaks and hills nearest, by height

  • Galloway Knob1,397 ft
  • Chapel Hill1,360 ft
  • Hawthorn Hill1,350 ft
  • Clark Hill1,350 ft
  • Cool Hill1,290 ft
How we measure
  • Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Bannock is an unincorporated community; figures cover the census-designated place, a statistical area.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); BTS time zones; NOAA NGS survey heights. All public domain.