Goshen Township, Belmont County, OH Elevation & Topographic Map
Elevation
1,390 ft 425 m1,280 ft 390 m1,230 ft 375 m1,120 ft 340 m1,010 ft 305 m950 ft 290 m
Contours every 200 ft, bold every 1,000 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Township area
- Fades everything outside the official township boundaries (US Census).
Elevation Data
Goshen Township, Belmont County sits at about 1,220 ft (370 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
1,220 ft 370 m
most residents: 1,170–1,260 ft
Lowest
950 ft 290 m
on the southeast side
Highest
1,390 ft 425 m
on the east side
Average
1,190 ft 365 m
all land inside township boundaries
Goshen Township, Belmont County spans about 440 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 1,220 ft370 m |
| Highest point Inside township boundaries, on the east side | 1,390 ft425 m |
| Lowest point Inside township boundaries, on the southeast side | 950 ft290 m |
| Airport (6G5) FAA airport elevation, the highest point of its runways, 3.8 mi west of the township boundaries | 1,312 ft400 m |
| Average of all land | 1,190 ft365 m |
Elevation profile, west to east
6.0 mi west to east through the middle of Goshen Township, Belmont County.
Topographic Map
- Location
- Township in Belmont County, Ohio, United States
- Population
- 2,927 2024 est.
- Land area
- 36.1 sq mi + 0.4 sq mi water
- Density
- 81 per sq mi
- Coordinates
- 40.0101° N, 81.0640° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Appalachian Plateaus
- Drains to
- Captina Creek → Ohio River → Mississippi River → Gulf of America
- Airport
- Barnesville/Bradfield (6G5) 1,312 ft
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Morristown1,280 ft
- Barnesville1,260 ft
- Warren Township1,250 ft
- Bethesda1,240 ft
- Goshen Township, Belmont County1,220 ft
- Lloydsville1,210 ft
- Union Township, Belmont County1,210 ft
- Belmont1,200 ft
- Smith Township, Belmont County1,170 ft
- Kirkwood Township1,160 ft
- Lafferty1,070 ft
Rankings by typical elevation
- Towns in Ohio67th highest of 2,572
- Towns in Belmont County6th highest of 37
Peaks and hills nearest, by height
- Galloway Knob1,397 ft
- Chapel Hill1,360 ft
- Clark Hill1,350 ft
- Kanzigg Hill1,290 ft
- Cool Hill1,290 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); FAA airport data; BTS time zones; NOAA NGS survey heights. All public domain.