Ramsey County, ND Elevation & Topographic Map

Elevation
1,640 ft 500 m1,590 ft 485 m1,560 ft 475 m1,510 ft 460 m1,450 ft 445 m1,430 ft 435 m
Zoom in for contour lines
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Ramsey County averages about 1,500 ft (455 m) above sea level across all its land. Its ground runs from 1,430 ft on the southwest side to 1,640 ft on the northeast side.
Average elevation
1,500 ft 455 m
all land inside the county
Highest
1,640 ft 500 m
on the northeast side
Lowest
1,430 ft 435 m
on the southwest side
Ramsey County spans about 210 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 1,500 ft455 m |
| Highest point Inside the county, on the northeast side | 1,640 ft500 m |
| Lowest point Inside the county, on the southwest side | 1,430 ft435 m |
Elevation profile, south to north
35 mi south to north through Devils Lake.
Topographic Map
- Location
- County in North Dakota, United States
- Population
- 11,510 2024 est.
- Land area
- 1,185.4 sq mi + 115.6 sq mi water
- Density
- 9.7 per sq mi
- Time zone
- Central UTC−6 / −5
- Landform region
- Central Lowland
- Drains to
- Stump Lake basin (does not reach the sea) 75%, Closed basin (does not reach the sea) 17%
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Towner County1,560 ft
- Benson County1,560 ft
- Cavalier County1,560 ft
- Nelson County1,500 ft
- Ramsey County1,500 ft
- Walsh County1,120 ft
Rankings by average elevation
- Counties in North Dakota42nd highest of 53
- Counties in the United States855th highest of 3,151
Peaks and hills highest inside
- Devils Lake Mountain1,640 ft
All 44 towns in Ramsey County by typical elevation
- Highland Center Township1,570 ft
- Hampden1,560 ft
- Northfield Township1,540 ft
- Prospect Township1,540 ft
- Newland Township1,530 ft
- Lawton Township1,530 ft
- Royal Township1,520 ft
- Edmore1,520 ft
- Lawton1,520 ft
- Lillehoff Township1,520 ft
- Fancher Township1,510 ft
- Newbre Township1,510 ft
- Brocket1,510 ft
- Bartlett Township1,510 ft
- Overland Township1,510 ft
- Klingstrup Township1,510 ft
- Triumph Township1,510 ft
- Hope Township, Ramsey County1,510 ft
- Ontario Township1,500 ft
- Starkweather1,500 ft
- Cato Township1,500 ft
- Sullivan Township1,490 ft
- Noonan Township1,490 ft
- Stevens Township1,490 ft
- Odessa Township1,490 ft
- Crary1,480 ft
- Harding Township1,480 ft
- Minnewaukan Township1,480 ft
- Morris Township1,470 ft
- Hammer Township1,470 ft
- Webster Township1,470 ft
- North Creel Township1,470 ft
- Poplar Grove Township1,470 ft
- Freshwater Township1,470 ft
- South Minnewaukan Township1,470 ft
- Grand Harbor Township1,460 ft
- Coulee Township1,460 ft
- Devils Lake1,460 ft
- Dry Lake Township1,460 ft
- Churchs Ferry1,450 ft
- De Groat Township1,450 ft
- Pelican Township1,450 ft
- Creel Township1,450 ft
- Chain Lakes Township1,450 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 1,430 ft at 48.0993° N, 98.8982° W, is in such a hollow or patch and is not counted.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.