Benton County, IN Elevation & Topographic Map

Elevation

910 ft 280 m850 ft 260 m820 ft 250 m760 ft 230 m690 ft 210 m660 ft 200 m

Contours every 500 ft, bold every 2,500 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
County area: Fades everything outside the official county boundary (US Census).

Elevation Data

Benton County averages about 760 ft (230 m) above sea level across all its land. Its ground runs from 660 ft on the southeast side to 910 ft on the southwest side.

Average elevation

760 ft 230 m

all land inside the county

Highest

910 ft 275 m

on the southwest side

Lowest

660 ft 200 m

on the southeast side

Benton County spans about 250 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

Figure	Elevation
Average of all land	760 ft230 m
Highest point Inside the county, on the southwest side	910 ft275 m
Lowest point Inside the county, on the southeast side	660 ft200 m

Elevation profile, west to east

23 mi west to east through Center Township, Benton County.

Topographic Map

Location: County in Indiana, United States
Population: 8,853 2024 est.
Land area: 406.4 sq mi + 0.1 sq mi water
Density: 22 per sq mi
Time zone: Eastern UTC−5 / −4
Landform region: Central Lowland
Drains to: Gulf of America

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Neighboring counties sharing a border, by average

Benton County760 ft
White County690 ft
Warren County690 ft
Tippecanoe County680 ft
Jasper County680 ft
Vermilion County, IL680 ft
Newton County670 ft
Iroquois County, IL670 ft

Rankings by average elevation

Counties in Indiana47th highest of 91
Counties in the United States1,912th highest of 3,151

Peaks and hills highest inside

Mount Nebo, Benton County820 ft
Mount Gilboa810 ft

All 20 towns in Benton County by typical elevation

How we measure

Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.