Templeton, IN Elevation & Topographic Map

Elevation

730 ft 220 m720 ft 220 m710 ft 215 m710 ft 215 m700 ft 210 m690 ft 210 m

Contours every 40 ft, bold every 200 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Area: Fades everything outside the official CDP boundary (US Census).

Elevation Data

Templeton sits at about 700 ft (215 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

700 ft 215 m

nearly all residents at this height

Lowest

690 ft 210 m

on the east side

Highest

700 ft 215 m

on the south side

Average

700 ft 215 m

all land inside the CDP boundary

Templeton is nearly flat: its ground varies by only about 10 ft, so the figures below sit close together.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	700 ft215 m
Highest point Inside the CDP boundary, on the south side	700 ft215 m
Lowest point Inside the CDP boundary, on the east side	690 ft210 m
Town center USGS map point for Templeton	700 ft215 m
Average of all land	700 ft215 m

Topographic Map

Location: Unincorporated community (census-designated place) in Benton County, Indiana, United States
Population: 75 2020 Census
Land area: 0.1 sq mi
Density: 636 per sq mi
Coordinates: 40.5128° N, 87.2078° W
Time zone: Eastern UTC−5 / −4
Landform region: Central Lowland
Drains to: Big Pine Creek → Wabash River → Ohio River → Mississippi River → Gulf of America
ZIP codes 1: 47986

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Indiana1,258th highest of 1,977
Towns in Benton Countylowest of 19

Peaks and hills nearest, by height

Mount Nebo, Benton County820 ft
Mount Gilboa810 ft
Hog Back Hill740 ft
Copeland Hill680 ft

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Templeton is an unincorporated community; figures cover the census-designated place, a statistical area.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.