Boswell, IN Elevation & Topographic Map

Elevation

760 ft 235 m750 ft 230 m750 ft 230 m740 ft 225 m730 ft 220 m720 ft 220 m

Contours every 40 ft, bold every 200 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Town area: Fades everything outside the official town limits (US Census).

Elevation Data

Boswell sits at about 750 ft (230 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

750 ft 230 m

most residents: 750–760 ft

Lowest

720 ft 220 m

on the southeast side

Highest

760 ft 235 m

on the southwest side

Average

750 ft 230 m

all land inside town limits

Boswell spans about 40 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	750 ft230 m
Highest point Inside town limits, on the southwest side	760 ft235 m
Lowest point Inside town limits, on the southeast side	720 ft220 m
Town center USGS map point for Boswell	750 ft230 m
Average of all land	750 ft230 m

Topographic Map

Location: Town in Benton County, Indiana, United States
Population: 811 2024 est.
Land area: 0.9 sq mi
Density: 917 per sq mi
Coordinates: 40.5211° N, 87.3784° W
Time zone: Eastern UTC−5 / −4
Landform region: Central Lowland
Drains to: Wabash River → Ohio River → Mississippi River → Gulf of America
ZIP codes 1: 47921

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Indiana1,012th highest of 1,977
Towns in Benton County6th highest of 19

Peaks and hills nearest, by height

Mount Nebo, Benton County820 ft
Mount Gilboa810 ft
Hog Back Hill740 ft
Copeland Hill680 ft

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.