Jasper County, IN Elevation & Topographic Map

Topographic elevation map of Jasper County, Indiana, shaded from 640 ft on the southwest side to 770 ft on the southwest side
Elevation
770 ft 235 m740 ft 225 m720 ft 220 m690 ft 210 m650 ft 200 m640 ft 195 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Jasper County averages about 680 ft (210 m) above sea level across all its land. Its ground runs from 640 ft on the southwest side to 770 ft on the southwest side.

Average elevation
680 ft 210 m
all land inside the county
Highest
770 ft 235 m
on the southwest side
Lowest
640 ft 195 m
on the southwest side

Jasper County spans about 130 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land680 ft210 m
Highest point
Inside the county, on the southwest side
770 ft235 m
Lowest point
Inside the county, on the southwest side
640 ft195 m

Elevation profile, south to north

35 mi south to north through Keener Township.

Topographic Map

Topographic elevation map of Jasper County, Indiana, shaded from 640 ft on the southwest side to 770 ft on the southwest side
County boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
County in Indiana, United States
Population
33,387 2024 est.
Land area
559.7 sq mi + 1.7 sq mi water
Density
60 per sq mi
Time zone
Central UTC−6 / −5
Landform region
Central Lowland
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Neighboring counties sharing a border, by average

  1. Benton County760 ft
  2. Starke County700 ft
  3. Pulaski County700 ft
  4. Porter County700 ft
  5. White County690 ft
  6. Jasper County680 ft
  7. Newton County670 ft
  8. Lake County660 ft

Rankings by average elevation

All 18 towns in Jasper County by typical elevation
  1. Remington730 ft
  2. Carpenter Township730 ft
  3. Fair Oaks700 ft
  4. Walker Township690 ft
  5. Union Township, Jasper County690 ft
  6. Barkley Township690 ft
  7. Gillam Township690 ft
  8. Hanging Grove Township680 ft
  9. Kankakee Township, Jasper County670 ft
  10. Wheatfield Township670 ft
  11. Newton Township670 ft
  12. Milroy Township670 ft
  13. Jordan Township670 ft
  14. Keener Township670 ft
  15. Wheatfield660 ft
  16. Marion Township, Jasper County660 ft
  17. Rensselaer660 ft
  18. DeMotte660 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 560 ft at 40.9271° N, 87.1449° W, is in such a hollow or patch and is not counted.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.