Lumbee SDTSA, NC Elevation & Topographic Map

Topographic elevation map of Lumbee SDTSA, North Carolina, shaded from 30 ft on the northeast side to 560 ft on the northwest side
Elevation
560 ft 170 m420 ft 130 m360 ft 110 m230 ft 70 m96 ft 29 m30 ft 9 m
Zoom in for contour lines
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Area
Fades everything outside the official statistical area boundary (US Census).

Elevation Data

Lumbee SDTSA averages about 170 ft (55 m) above sea level across all its land. Its ground runs from 30 ft on the northeast side to 560 ft on the northwest side.

Average elevation
170 ft 55 m
all land inside the statistical area
Highest
560 ft 170 m
on the northwest side
Lowest
30 ft 9 m
on the northeast side

Lumbee SDTSA spans about 530 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land170 ft55 m
Highest point
Inside the statistical area, on the northwest side
560 ft170 m
Lowest point
Inside the statistical area, on the northeast side
30 ft9 m

Elevation profile, west to east

45 mi west to east through Fayetteville.

Topographic Map

Topographic elevation map of Lumbee SDTSA, North Carolina, shaded from 30 ft on the northeast side to 560 ft on the northwest side
Census statistical area boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
State designated tribal statistical area in North Carolina, United States (U.S. Census Bureau)
Population
510,711 2020 Census
Land area
2,041.2 sq mi + 9.1 sq mi water
Density
250 per sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Coastal Plain
Drains to
Atlantic Ocean
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearest tribal lands nearest, by average

  1. Pee Dee SDTSA, SC220 ft
  2. Lumbee SDTSA170 ft
  3. Coharie SDTSA170 ft
  4. Upper South Carolina Pee Dee SDTSA, SC140 ft
  5. Waccamaw Siouan SDTSA69 ft
  6. Waccamaw SDTSA, SC51 ft

Rankings by average elevation

Peaks and hills highest inside

  • Sandstone Hill520 ft
  • Wolf Hill100 ft
All 43 towns in the statistical area by typical elevation
  1. Ashley Heights370 ft
  2. Deercroft330 ft
  3. Five Points310 ft
  4. Old Hundred300 ft
  5. Raeford250 ft
  6. Bowmore250 ft
  7. Gibson250 ft
  8. Laurel Hill240 ft
  9. Silver City230 ft
  10. Wagram230 ft
  11. Spring Lake220 ft
  12. Dundarrach220 ft
  13. Laurinburg220 ft
  14. Rockfish210 ft
  15. Fayetteville210 ft
  16. Wakulla210 ft
  17. Red Springs200 ft
  18. Maxton190 ft
  19. Scotch Meadows190 ft
  20. Shannon190 ft
  21. Lumber Bridge190 ft
  22. Prospect190 ft
  23. Rennert180 ft
  24. Rex180 ft
  25. Parkton180 ft
  26. Pembroke170 ft
  27. St. Pauls160 ft
  28. Raemon160 ft
  29. Hope Mills160 ft
  30. Elrod150 ft
  31. Raynham150 ft
  32. Rowland150 ft
  33. McDonald140 ft
  34. Barker Ten Mile140 ft
  35. Lumberton140 ft
  36. Eastover130 ft
  37. Vander130 ft
  38. Stedman130 ft
  39. Fairmont120 ft
  40. Linden110 ft
  41. Proctorville110 ft
  42. Orrum100 ft
  43. Marietta87 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census statistical area boundary (TIGER/Line AIANNH, Jan 1 2026), weighted equally, on a 2 arc-second (≈200 ft, 62 m) grid, coarsened from 1 arc-second so the whole area fits one run. Land means the boundary minus Census area water (on this grid, water areas of at least half a cell).
  • Highest and lowest: the highest land cell, re-read at 1 arc-second around the 25 highest grid cells. Lowest: the lowest land cell, re-read at 1 arc-second around the 25 lowest grid cells; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Name: the Census Bureau's legal or statistical area name, as published; the nation's own name may differ.
  • Population: 2020 Census residents of the blocks inside the boundary.
  • Nearby Places: nearest tribal lands and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the statistical area with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the statistical area.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks); NOAA NGS survey heights; BTS time zones. All public domain.