Rennert, NC Elevation & Topographic Map
Elevation
200 ft 60 m190 ft 60 m190 ft 60 m180 ft 55 m170 ft 55 m170 ft 50 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Rennert sits at about 180 ft (55 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
180 ft 55 m
nearly all residents at this height
Lowest
170 ft 50 m
on the northeast side
Highest
190 ft 60 m
on the northeast side
Average
180 ft 55 m
all land inside town limits
Rennert is nearly flat: its ground varies by only about 20 ft, so the figures below sit close together.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 180 ft55 m |
| Highest point Inside town limits, on the northeast side | 190 ft60 m |
| Lowest point Inside town limits, on the northeast side | 170 ft50 m |
| Town center USGS map point for Rennert | 180 ft55 m |
| Average of all land | 180 ft55 m |
Topographic Map
- Location
- Town in Robeson County, North Carolina, United States
- Population
- 288 2024 est.
- Land area
- 1.1 sq mi
- Density
- 261 per sq mi
- Coordinates
- 34.8143° N, 79.0809° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Coastal Plain
- Drains to
- Little Pee Dee River → Great Pee Dee River → Atlantic Ocean
- ZIP codes 1
- 28386
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Dundarrach220 ft
- Wakulla210 ft
- Red Springs200 ft
- Shannon190 ft
- Lumber Bridge190 ft
- Prospect190 ft
- Rennert180 ft
- Rex180 ft
- Parkton180 ft
- St. Pauls160 ft
- Barker Ten Mile140 ft
Rankings by typical elevation
- Towns in North Carolina456th highest of 782
- Towns in Robeson County7th highest of 22
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.