Lumber Bridge, NC Elevation & Topographic Map

Elevation
210 ft 65 m200 ft 60 m190 ft 60 m190 ft 55 m180 ft 55 m170 ft 55 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Lumber Bridge sits at about 190 ft (60 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
190 ft 60 m
nearly all residents at this height
Lowest
170 ft 55 m
on the east side
Highest
200 ft 60 m
on the northwest side
Average
190 ft 60 m
all land inside town limits
Lumber Bridge spans about 30 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 190 ft60 m |
| Highest point Inside town limits, on the northwest side | 200 ft60 m |
| Lowest point Inside town limits, on the east side | 170 ft55 m |
| Town center USGS map point for Lumber Bridge | 190 ft60 m |
| Airport (FAY) FAA airport elevation, the highest point of its runways, 12 mi northeast of the town limits | 189 ft58 m |
| Average of all land | 190 ft60 m |
Topographic Map
- Location
- Town in Robeson County, North Carolina, United States
- Population
- 85 2024 est.
- Land area
- 0.7 sq mi
- Density
- 127 per sq mi
- Coordinates
- 34.8885° N, 79.0723° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Coastal Plain
- Drains to
- Little Pee Dee River → Great Pee Dee River → Atlantic Ocean
- Airport
- Fayetteville Regional/Grannis Field (FAY) 189 ft
- ZIP codes 1
- 28357
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Raeford250 ft
- Dundarrach220 ft
- Rockfish210 ft
- Red Springs200 ft
- Shannon190 ft
- Lumber Bridge190 ft
- Rennert180 ft
- Rex180 ft
- Parkton180 ft
- St. Pauls160 ft
- Hope Mills160 ft
Rankings by typical elevation
- Towns in North Carolina448th highest of 782
- Towns in Robeson County5th highest of 22
Peaks and hills nearest, by height
- Finlayson Mountain490 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.