Hope Mills, NC Elevation & Topographic Map

Elevation
220 ft 65 m180 ft 55 m160 ft 50 m120 ft 35 m80 ft 24 m59 ft 18 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Hope Mills sits at about 160 ft (50 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
160 ft 50 m
most residents: 110–180 ft
Lowest
59 ft 18 m
on the east side
Highest
220 ft 65 m
on the northeast side
Average
150 ft 45 m
all land inside town limits
Hope Mills spans about 161 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 160 ft50 m |
| Highest point Inside town limits, on the northeast side | 220 ft65 m |
| Lowest point Inside town limits, on the east side | 59 ft18 m |
| Town center USGS map point for Hope Mills | 110 ft35 m |
| Airport (FAY) FAA airport elevation, the highest point of its runways, 2.3 mi east of the town limits | 189 ft58 m |
| Average of all land | 150 ft45 m |
Elevation profile, west to east
4.2 mi west to east through the town center.
Topographic Map
- Location
- Town in Cumberland County, North Carolina, United States
- Population
- 18,102 2024 est.
- Land area
- 9.1 sq mi + 0.2 sq mi water
- Density
- 1,979 per sq mi
- Coordinates
- 34.9704° N, 78.9453° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Coastal Plain
- Drains to
- Cape Fear River → Atlantic Ocean
- Airport
- Fayetteville Regional/Grannis Field (FAY) 189 ft
- ZIP codes 3
- 28304 28306 28348
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Dundarrach220 ft
- Rockfish210 ft
- Fayetteville210 ft
- Lumber Bridge190 ft
- Rennert180 ft
- Rex180 ft
- Parkton180 ft
- St. Pauls160 ft
- Hope Mills160 ft
- Eastover130 ft
- Vander130 ft
Rankings by typical elevation
- Towns in North Carolina472nd highest of 782
- Towns in Cumberland County3rd highest of 10
Peaks and hills nearest, by height
- Finlayson Mountain490 ft
- Coolyconch Mountain450 ft
- Vaughn Hill425 ft
- Caisson Hill420 ft
- West Newton Hill380 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 57 ft at 34.9663° N, 78.9137° W, is in such a hollow or patch and is not counted.
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones; NOAA NGS survey heights. All public domain.