Tarrant County, TX Elevation & Topographic Map

Topographic elevation map of Tarrant County, Texas, shaded from 420 ft on the east side to 970 ft on the southwest side
Elevation
970 ft 295 m830 ft 255 m760 ft 230 m620 ft 190 m490 ft 150 m420 ft 125 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Tarrant County averages about 660 ft (200 m) above sea level across all its land. Its ground runs from 420 ft on the east side to 970 ft on the southwest side.

Average elevation
660 ft 200 m
all land inside the county
Highest
970 ft 295 m
on the southwest side
Lowest
420 ft 125 m
on the east side

Tarrant County spans about 550 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land660 ft200 m
Highest point
Inside the county, on the southwest side
970 ft295 m
Lowest point
Inside the county, on the east side
420 ft125 m

Elevation profile, west to east

30 mi west to east through Fort Worth.

Topographic Map

Topographic elevation map of Tarrant County, Texas, shaded from 420 ft on the east side to 970 ft on the southwest side
County boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
County in Texas, United States
Population
2,230,708 2024 est.
Land area
865.4 sq mi + 38.4 sq mi water
Density
2,578 per sq mi
Time zone
Central UTC−6 / −5
Landform regions
Central Lowland 67%, Coastal Plain 23%, Great Plains 10%
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 43 towns in Tarrant County by typical elevation
  1. Crowley770 ft
  2. Burleson partly760 ft
  3. Haslet760 ft
  4. Reno partly760 ft
  5. Saginaw740 ft
  6. Briar740 ft
  7. Sansom Park730 ft
  8. Edgecliff Village720 ft
  9. Azle720 ft
  10. White Settlement700 ft
  11. Rendon700 ft
  12. Westlake700 ft
  13. Lakeside690 ft
  14. Westover Hills690 ft
  15. Keller690 ft
  16. Benbrook690 ft
  17. Pecan Acres680 ft
  18. Pelican Bay680 ft
  19. Fort Worth680 ft
  20. Blue Mound670 ft
  21. Lake Worth660 ft
  22. Everman650 ft
  23. Kennedale650 ft
  24. Forest Hill640 ft
  25. Watauga640 ft
  26. Southlake630 ft
  27. North Richland Hills620 ft
  28. Mansfield620 ft
  29. Colleyville620 ft
  30. Arlington610 ft
  31. Flower Mound partly600 ft
  32. River Oaks600 ft
  33. Trophy Club partly600 ft
  34. Grapevine600 ft
  35. Bedford590 ft
  36. Dalworthington Gardens580 ft
  37. Haltom City580 ft
  38. Pantego580 ft
  39. Westworth Village570 ft
  40. Euless560 ft
  41. Hurst560 ft
  42. Richland Hills550 ft
  43. Grand Prairie partly520 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 420 ft at 32.7888° N, 97.0354° W, is in such a hollow or patch and is not counted.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.