Wyoming County, PA Elevation & Topographic Map

Topographic elevation map of Wyoming County, Pennsylvania, shaded from 550 ft on the southeast side to 2,380 ft on Bartlett Mountain
Elevation
2,380 ft 725 m1,930 ft 585 m1,700 ft 515 m1,240 ft 380 m780 ft 240 m550 ft 170 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Wyoming County averages about 1,290 ft (390 m) above sea level across all its land. Its ground runs from 550 ft on the southeast side to 2,380 ft on Bartlett Mountain.

Average elevation
1,290 ft 390 m
all land inside the county
Highest
2,380 ft 725 m
on Bartlett Mountain
Lowest
550 ft 170 m
on the southeast side

Wyoming County spans about 1,830 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land1,290 ft390 m
Highest point
Inside the county, on Bartlett Mountain (3DEP terrain model; no NGS survey height)
2,380 ft725 m
Lowest point
Inside the county, on the southeast side
550 ft170 m

Elevation profile, west to east

22 mi west to east through Tunkhannock Township, Wyoming County.

Topographic Map

Topographic elevation map of Wyoming County, Pennsylvania, shaded from 550 ft on the southeast side to 2,380 ft on Bartlett Mountain
County boundary (dashed) over shaded terrain, with contours every 100 ft (30 m).
Location
County in Pennsylvania, United States
Population
25,771 2024 est.
Land area
397.3 sq mi + 7.7 sq mi water
Density
65 per sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Appalachian Plateaus 99%
Drains to
Atlantic Ocean
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Neighboring counties sharing a border, by average

  1. Sullivan County1,790 ft
  2. Lackawanna County1,460 ft
  3. Susquehanna County1,430 ft
  4. Bradford County1,380 ft
  5. Wyoming County1,290 ft
  6. Luzerne County1,270 ft

Rankings by average elevation

Peaks and hills highest inside

  • Bartlett Mountain2,380 ft
  • Mehoopany Mountain2,360 ft
  • Forkston Mountain2,350 ft
  • South Mountain, Wyoming County2,330 ft
  • Miller Mountain2,200 ft
All 27 towns in Wyoming County by typical elevation
  1. Forkston Township1,560 ft
  2. North Branch Township1,240 ft
  3. Northmoreland Township1,130 ft
  4. Monroe Township, Wyoming County1,130 ft
  5. Windham Township, Wyoming County1,120 ft
  6. Overfield Township1,110 ft
  7. Nicholson Township, Wyoming County1,070 ft
  8. Noxen Township1,070 ft
  9. Lemon Township1,070 ft
  10. Washington Township, Wyoming County1,050 ft
  11. Clinton Township, Wyoming County1,050 ft
  12. Meshoppen Township1,050 ft
  13. Lake Winola1,050 ft
  14. Eaton Township1,030 ft
  15. Noxen1,000 ft
  16. Tunkhannock Township, Wyoming County1,000 ft
  17. Falls Township, Wyoming County970 ft
  18. Factoryville880 ft
  19. Mehoopany Township840 ft
  20. Braintrim Township800 ft
  21. Mehoopany770 ft
  22. Nicholson750 ft
  23. Laceyville690 ft
  24. Meshoppen680 ft
  25. Tunkhannock660 ft
  26. Exeter Township, Wyoming County650 ft
  27. West Falls610 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.