Delaware County, OK Elevation & Topographic Map

Topographic elevation map of Delaware County, Oklahoma, shaded from 660 ft on the west side to 1,260 ft on the southwest side
Elevation
1,260 ft 385 m1,110 ft 340 m1,040 ft 315 m890 ft 270 m740 ft 225 m660 ft 200 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Delaware County averages about 980 ft (300 m) above sea level across all its land. Its ground runs from 660 ft on the west side to 1,260 ft on the southwest side.

Average elevation
980 ft 300 m
all land inside the county
Highest
1,260 ft 385 m
on the southwest side
Lowest
660 ft 200 m
on the west side

Delaware County spans about 600 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land980 ft300 m
Highest point
Inside the county, on the southwest side
1,260 ft385 m
Lowest point
Inside the county, on the west side
660 ft200 m

Elevation profile, south to north

35 mi south to north through Grove.

Topographic Map

Topographic elevation map of Delaware County, Oklahoma, shaded from 660 ft on the west side to 1,260 ft on the southwest side
County boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
County in Oklahoma, United States
Population
41,771 2024 est.
Land area
737.6 sq mi + 54.3 sq mi water
Density
57 per sq mi
Time zone
Central UTC−6 / −5
Landform region
Ozark Plateaus 94%
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 33 towns in Delaware County by typical elevation
  1. Kansas1,150 ft
  2. Colcord1,150 ft
  3. Cloud Creek1,140 ft
  4. West Siloam Springs1,130 ft
  5. Leach1,130 ft
  6. Twin Oaks1,120 ft
  7. Indianola, Delaware County1,120 ft
  8. Sycamore1,100 ft
  9. Dripping Springs1,080 ft
  10. Deer Lick1,070 ft
  11. Oaks1,070 ft
  12. Flint Creek1,060 ft
  13. New Eucha1,060 ft
  14. Jay1,040 ft
  15. Rocky Ford partly1,020 ft
  16. White Water1,010 ft
  17. Bull Hollow990 ft
  18. Oak Hill-Piney970 ft
  19. Brush Creek940 ft
  20. Zena940 ft
  21. Old Eucha930 ft
  22. Dodge930 ft
  23. Tagg Flats920 ft
  24. Kenwood900 ft
  25. Drowning Creek890 ft
  26. Dennis850 ft
  27. Butler, Delaware County850 ft
  28. Cayuga820 ft
  29. Grove790 ft
  30. Bernice780 ft
  31. Ketchum partly770 ft
  32. Cleora770 ft
  33. Copeland760 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.