Benton County, AR Elevation & Topographic Map

Elevation
1,810 ft 550 m1,570 ft 480 m1,450 ft 445 m1,220 ft 370 m980 ft 300 m860 ft 260 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Benton County averages about 1,240 ft (380 m) above sea level across all its land. Its ground runs from 860 ft on the northwest side to 1,810 ft on Whitney Mountain.
Average elevation
1,240 ft 380 m
all land inside the county
Highest
1,810 ft 550 m
on Whitney Mountain
Lowest
860 ft 260 m
on the northwest side
Benton County spans about 950 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 1,240 ft380 m |
| Highest point Inside the county, on Whitney Mountain (3DEP terrain model; no NGS survey height) | 1,810 ft550 m |
| Lowest point Inside the county, on the northwest side | 860 ft260 m |
Elevation profile, west to east
41 mi west to east through Rogers.
Topographic Map
- Location
- County in Arkansas, United States
- Population
- 321,566 2024 est.
- Land area
- 847.7 sq mi + 36.6 sq mi water
- Density
- 379 per sq mi
- Time zone
- Central UTC−6 / −5
- Landform region
- Ozark Plateaus
- Drains to
- Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Madison County1,660 ft
- Washington County1,410 ft
- Carroll County1,350 ft
- Barry County, MO1,330 ft
- Benton County1,240 ft
- McDonald County, MO1,110 ft
- Adair County, OK1,070 ft
- Delaware County, OK980 ft
Rankings by average elevation
- Counties in Arkansas5th highest of 75
- Counties in the United States1,064th highest of 3,151
Peaks and hills highest inside
- Whitney Mountain1,810 ft
- Rich Mountain, Benton County1,760 ft
- Sugar Mountain, Benton County1,740 ft
- Trimble Mountain1,730 ft
- Pond Mountain, Benton County1,730 ft
All 24 towns in Benton County by typical elevation
- Gateway1,560 ft
- Garfield1,470 ft
- Springdale partly1,330 ft
- Avoca1,330 ft
- Highfill1,320 ft
- Lowell1,320 ft
- Rogers1,320 ft
- Little Flock1,300 ft
- Pea Ridge1,300 ft
- Centerton1,300 ft
- Prairie Creek1,290 ft
- Lost Bridge Village1,270 ft
- Bentonville1,270 ft
- Elm Springs partly1,260 ft
- Cave Springs1,250 ft
- Decatur1,250 ft
- Springtown1,230 ft
- Gentry1,230 ft
- Gravette1,220 ft
- Bella Vista1,180 ft
- Cherokee City1,160 ft
- Siloam Springs1,150 ft
- Maysville1,060 ft
- City of Sulphur Springs950 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 860 ft at 36.4985° N, 94.4762° W, is in such a hollow or patch and is not counted.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.