Mayes County, OK Elevation & Topographic Map

Topographic elevation map of Mayes County, Oklahoma, shaded from 560 ft on the south side to 1,280 ft on the southeast side
Elevation
1,280 ft 390 m1,100 ft 335 m1,010 ft 305 m830 ft 250 m650 ft 195 m560 ft 170 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Mayes County averages about 720 ft (220 m) above sea level across all its land. Its ground runs from 560 ft on the south side to 1,280 ft on the southeast side.

Average elevation
720 ft 220 m
all land inside the county
Highest
1,280 ft 390 m
on the southeast side
Lowest
560 ft 170 m
on the south side

Mayes County spans about 720 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land720 ft220 m
Highest point
Inside the county, on the southeast side
1,280 ft390 m
Lowest point
Inside the county, on the south side
560 ft170 m

Elevation profile, west to east

24 mi west to east through Pryor Creek.

Topographic Map

Topographic elevation map of Mayes County, Oklahoma, shaded from 560 ft on the south side to 1,280 ft on the southeast side
County boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
County in Oklahoma, United States
Population
40,144 2024 est.
Land area
655.3 sq mi + 28.2 sq mi water
Density
61 per sq mi
Time zone
Central UTC−6 / −5
Landform regions
Central Lowland 65%, Ozark Plateaus 35%
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Neighboring counties sharing a border, by average

  1. Delaware County980 ft
  2. Cherokee County860 ft
  3. Craig County800 ft
  4. Mayes County720 ft
  5. Rogers County680 ft
  6. Wagoner County610 ft

Rankings by average elevation

Peaks and hills highest inside

  • Hadley Mountain920 ft
  • Neely Mountain900 ft
  • Jesse James Hill800 ft
  • Bald Knob, Mayes County780 ft
All 27 towns in Mayes County by typical elevation
  1. Rose960 ft
  2. Cedar Crest930 ft
  3. Snake Creek920 ft
  4. Little Rock910 ft
  5. Kenwood partly900 ft
  6. Wickliffe840 ft
  7. Disney810 ft
  8. Pump Back790 ft
  9. Grand Lake Towne790 ft
  10. Ketchum partly770 ft
  11. Langley770 ft
  12. Iron Post770 ft
  13. Ballou720 ft
  14. Murphy720 ft
  15. Locust Grove690 ft
  16. Sportmans Shores690 ft
  17. Spavinaw680 ft
  18. Adair680 ft
  19. Pensacola660 ft
  20. Strang650 ft
  21. Pin Oak Acres650 ft
  22. Salina650 ft
  23. Pryor Creek630 ft
  24. Chouteau630 ft
  25. Sams Corner620 ft
  26. Sportsmen Acres610 ft
  27. Mazie610 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 550 ft at 36.2587° N, 95.2318° W, is in such a hollow or patch and is not counted.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.