Licking County, OH Elevation & Topographic Map

Elevation
1,360 ft 415 m1,200 ft 365 m1,130 ft 345 m980 ft 300 m830 ft 250 m750 ft 230 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Licking County averages about 1,030 ft (315 m) above sea level across all its land. Its ground runs from 750 ft on the east side to 1,360 ft on the northwest side.
Average elevation
1,030 ft 315 m
all land inside the county
Highest
1,360 ft 415 m
on the northwest side
Lowest
750 ft 230 m
on the east side
Licking County spans about 610 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 1,030 ft315 m |
| Highest point Inside the county, on the northwest side | 1,360 ft415 m |
| Lowest point Inside the county, on the east side | 750 ft230 m |
Elevation profile, west to east
30 mi west to east through Newark.
Topographic Map
- Location
- County in Ohio, United States
- Population
- 184,898 2024 est.
- Land area
- 682.4 sq mi + 4.9 sq mi water
- Density
- 271 per sq mi
- Time zone
- Eastern UTC−5 / −4
- Landform regions
- Central Lowland 56%, Appalachian Plateaus 44%
- Drains to
- Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Knox County1,120 ft
- Licking County1,030 ft
- Delaware County960 ft
- Coshocton County950 ft
- Perry County940 ft
- Fairfield County940 ft
- Muskingum County890 ft
- Franklin County850 ft
Rankings by average elevation
- Counties in Ohio24th highest of 88
- Counties in the United States1,346th highest of 3,151
Peaks and hills highest inside
- Beavers Hill1,260 ft
- Coffman Knob1,240 ft
- Bald Knob, Licking County1,220 ft
- Fox Den Knob1,190 ft
- Bucks Knob1,190 ft
All 49 towns in Licking County by typical elevation
- Beechwood Trails1,190 ft
- Liberty Township, Licking County1,190 ft
- Harrison Township, Licking County1,170 ft
- Jersey Township1,170 ft
- Hartford (Croton)1,160 ft
- McKean Township1,160 ft
- Hartford Township, Licking County1,160 ft
- Johnstown1,150 ft
- Monroe Township, Licking County1,140 ft
- Jersey1,130 ft
- Bennington Township, Licking County1,130 ft
- Eden Township, Licking County1,080 ft
- Etna1,080 ft
- Granville South1,070 ft
- Pataskala1,060 ft
- St. Albans Township1,040 ft
- Burlington Township1,040 ft
- Franklin Township, Licking County1,040 ft
- Granville Township1,040 ft
- New Albany partly1,040 ft
- Fallsbury Township1,030 ft
- Mary Ann Township1,030 ft
- Etna Township1,030 ft
- Hopewell Township, Licking County1,010 ft
- Bowling Green Township1,000 ft
- Washington Township, Licking County990 ft
- Granville980 ft
- Alexandria980 ft
- Utica980 ft
- Gratiot980 ft
- Jacksontown980 ft
- Perry Township, Licking County960 ft
- Newark Township950 ft
- Brownsville940 ft
- Kirkersville940 ft
- Licking Township930 ft
- Harbor Hills910 ft
- Newton Township, Licking County910 ft
- St. Louisville910 ft
- Madison Township, Licking County900 ft
- Union Township, Licking County900 ft
- Reynoldsburg partly890 ft
- Hebron890 ft
- Buckeye Lake890 ft
- Heath870 ft
- Newark860 ft
- Hanover Township, Licking County830 ft
- Hanover830 ft
- Marne810 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.