Marne, OH Elevation & Topographic Map
Elevation
900 ft 275 m870 ft 265 m860 ft 260 m830 ft 255 m800 ft 245 m780 ft 240 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official CDP boundary (US Census).
Elevation Data
Marne sits at about 810 ft (245 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
810 ft 245 m
most residents: 800–830 ft
Lowest
780 ft 240 m
on the southwest side
Highest
900 ft 275 m
on the east edge, below higher ground just outside
Average
820 ft 250 m
all land inside the CDP boundary
Marne spans about 120 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 810 ft245 m |
| Highest point Inside the CDP boundary, on the east edge, below higher ground just outside | 900 ft275 m |
| Lowest point Inside the CDP boundary, on the southwest side | 780 ft240 m |
| Town center USGS map point for Marne | 800 ft245 m |
| Airport (VTA) FAA airport elevation, the highest point of its runways, 8.0 mi west of the CDP boundary | 884 ft269 m |
| Average of all land | 820 ft250 m |
Elevation profile, west to east
1.3 mi west to east through the town center.
Topographic Map
- Location
- Unincorporated community (census-designated place) in Licking County, Ohio, United States
- Population
- 772 2020 Census
- Land area
- 0.9 sq mi
- Density
- 880 per sq mi
- Coordinates
- 40.0712° N, 82.3093° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Appalachian Plateaus
- Drains to
- Licking River → Muskingum River → Ohio River → Mississippi River → Gulf of America
- Airport
- Licking County Regional (VTA) 884 ft
- ZIP codes 1
- 43055
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Franklin Township, Licking County1,040 ft
- Mary Ann Township1,030 ft
- Hopewell Township, Licking County1,010 ft
- Perry Township, Licking County960 ft
- Newark Township950 ft
- Madison Township, Licking County900 ft
- Newark860 ft
- Nashport830 ft
- Hanover Township, Licking County830 ft
- Hanover830 ft
- Marne810 ft
Rankings by typical elevation
- Towns in Ohio1,774th highest of 2,572
- Towns in Licking Countylowest of 47
Peaks and hills nearest, by height
- Coffman Knob1,240 ft
- Bald Knob, Licking County1,220 ft
- Bucks Knob1,190 ft
- Bald Knob, Licking County1,120 ft
- Coshocton Hill950 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Marne is an unincorporated community; figures cover the census-designated place, a statistical area.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.