Clermont County, OH Elevation & Topographic Map

Topographic elevation map of Clermont County, Ohio, shaded from 470 ft on the southwest side to 980 ft on the northeast side
Elevation
980 ft 300 m850 ft 260 m790 ft 240 m660 ft 200 m530 ft 160 m470 ft 140 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Clermont County averages about 830 ft (250 m) above sea level across all its land. Its ground runs from 470 ft on the southwest side to 980 ft on the northeast side.

Average elevation
830 ft 250 m
all land inside the county
Highest
980 ft 300 m
on the northeast side
Lowest
470 ft 140 m
on the southwest side

Clermont County spans about 510 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land830 ft250 m
Highest point
Inside the county, on the northeast side
980 ft300 m
Lowest point
Inside the county, on the southwest side
470 ft140 m

Elevation profile, south to north

22 mi south to north through Union Township.

Topographic Map

Topographic elevation map of Clermont County, Ohio, shaded from 470 ft on the southwest side to 980 ft on the northeast side
County boundary (dashed) over shaded terrain, with contours every 100 ft (30 m).
Location
County in Ohio, United States
Population
214,123 2024 est.
Land area
452.6 sq mi + 7.7 sq mi water
Density
473 per sq mi
Time zone
Eastern UTC−5 / −4
Landform regions
Central Lowland 74%, Interior Low Plateaus 26%
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Neighboring counties sharing a border, by average

  1. Clinton County1,030 ft
  2. Brown County900 ft
  3. Warren County850 ft
  4. Clermont County830 ft
  5. Bracken County, KY800 ft
  6. Pendleton County, KY740 ft
  7. Hamilton County710 ft
  8. Campbell County, KY700 ft

Rankings by average elevation

  • Counties in Ohio63rd highest of 88
  • Counties in the United States1,761st highest of 3,151

Peaks and hills highest inside

  • Galley Hill880 ft
All 35 towns in Clermont County by typical elevation
  1. Felicity920 ft
  2. Marathon910 ft
  3. Wayne Township, Clermont County910 ft
  4. Jackson Township, Clermont County910 ft
  5. Tate Township890 ft
  6. Bethel880 ft
  7. Withamsville880 ft
  8. Williamsburg Township880 ft
  9. Williamsburg880 ft
  10. Mount Carmel880 ft
  11. Mount Repose880 ft
  12. Amelia870 ft
  13. Day Heights870 ft
  14. Franklin Township, Clermont County870 ft
  15. Monroe Township, Clermont County870 ft
  16. Pierce Township870 ft
  17. Owensville860 ft
  18. Goshen Township860 ft
  19. Batavia Township850 ft
  20. Union Township850 ft
  21. Stonelick Township850 ft
  22. Goshen840 ft
  23. Summerside830 ft
  24. Miami Township, Clermont County830 ft
  25. Mulberry820 ft
  26. Washington Township, Clermont County810 ft
  27. Loveland partly730 ft
  28. Ohio Township700 ft
  29. Batavia610 ft
  30. New Richmond590 ft
  31. Milford590 ft
  32. Miamiville580 ft
  33. Chilo500 ft
  34. Moscow500 ft
  35. Neville500 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.