Felicity, OH Elevation & Topographic Map
Elevation
930 ft 285 m920 ft 280 m920 ft 280 m910 ft 280 m900 ft 275 m900 ft 275 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Village area
- Fades everything outside the official village limits (US Census).
Elevation Data
Felicity sits at about 920 ft (280 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
920 ft 280 m
most residents: 910–920 ft
Lowest
900 ft 275 m
on the southwest side
Highest
930 ft 280 m
near the middle
Average
910 ft 280 m
all land inside village limits
Felicity spans about 30 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 920 ft280 m |
| Highest point Inside village limits, near the middle | 930 ft280 m |
| Lowest point Inside village limits, on the southwest side | 900 ft275 m |
| Town center USGS map point for Felicity | 920 ft280 m |
| Average of all land | 910 ft280 m |
Topographic Map
- Location
- Village in Clermont County, Ohio, United States
- Population
- 661 2024 est.
- Land area
- 0.3 sq mi
- Density
- 2,504 per sq mi
- Coordinates
- 38.8390° N, 84.0963° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Interior Low Plateaus
- Drains to
- Ohio River → Mississippi River → Gulf of America
- ZIP codes 1
- 45120
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Hamersville970 ft
- Felicity920 ft
- Tate Township890 ft
- Lewis Township880 ft
- Franklin Township, Clermont County870 ft
- Washington Township, Clermont County810 ft
- Augusta, KY520 ft
- Higginsport510 ft
- Chilo500 ft
- Moscow500 ft
- Neville500 ft
Rankings by typical elevation
- Towns in Ohio1,263rd highest of 2,572
- Towns in Clermont Countyhighest of 34
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the village limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census village limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.