Bracken County, KY Elevation & Topographic Map
Elevation
1,000 ft 305 m870 ft 265 m800 ft 245 m670 ft 205 m540 ft 165 m470 ft 145 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Bracken County averages about 800 ft (245 m) above sea level across all its land. Its ground runs from 470 ft on the northwest side to 1,000 ft on the west side.
Average elevation
800 ft 245 m
all land inside the county
Highest
1,000 ft 305 m
on the west side
Lowest
470 ft 145 m
on the northwest side
Bracken County spans about 530 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 800 ft245 m |
| Highest point Inside the county, on the west side | 1,000 ft305 m |
| Lowest point Inside the county, on the northwest side | 470 ft145 m |
Elevation profile, south to north
13 mi south to north through Augusta.
Topographic Map
- Location
- County in Kentucky, United States
- Population
- 8,497 2024 est.
- Land area
- 202.7 sq mi + 6.3 sq mi water
- Density
- 42 per sq mi
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Interior Low Plateaus
- Drains to
- Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Brown County, OH900 ft
- Mason County840 ft
- Clermont County, OH830 ft
- Harrison County810 ft
- Bracken County800 ft
- Robertson County790 ft
- Pendleton County740 ft
Rankings by average elevation
- Counties in Kentucky58th highest of 119
- Counties in the United States1,799th highest of 3,151
All 3 towns in Bracken County by typical elevation
- Germantown950 ft
- Brooksville890 ft
- Augusta520 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.