Warren County, NJ Elevation & Topographic Map

Topographic elevation map of Warren County, New Jersey, shaded from 130 ft on the southwest side to 1,600 ft on the north side
Elevation
1,600 ft 490 m1,240 ft 375 m1,050 ft 320 m680 ft 210 m320 ft 95 m130 ft 40 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Warren County averages about 610 ft (185 m) above sea level across all its land. Its ground runs from 130 ft on the southwest side to 1,600 ft on the north side.

Average elevation
610 ft 185 m
all land inside the county
Highest
1,600 ft 490 m
on the north side
Lowest
130 ft 40 m
on the southwest side

Warren County spans about 1,470 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land610 ft185 m
Highest point
Inside the county, on the north side
1,600 ft490 m
Lowest point
Inside the county, on the southwest side
130 ft40 m

Elevation profile, west to east

11 mi west to east through Phillipsburg.

Topographic Map

Topographic elevation map of Warren County, New Jersey, shaded from 130 ft on the southwest side to 1,600 ft on the north side
County boundary (dashed) over shaded terrain, with contours every 100 ft (30 m).
Location
County in New Jersey, United States
Population
112,031 2024 est.
Land area
356.5 sq mi + 6.1 sq mi water
Density
314 per sq mi
Time zone
Eastern UTC−5 / −4
Landform regions
New England 61%, Valley and Ridge 39%
Drains to
Atlantic Ocean
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 58 towns in Warren County by typical elevation
  1. Port Murray900 ft
  2. Liberty Township720 ft
  3. Independence Township700 ft
  4. Panther Valley690 ft
  5. Allamuchy Township680 ft
  6. Vienna640 ft
  7. Frelinghuysen Township630 ft
  8. Hardwick Township610 ft
  9. Beattystown600 ft
  10. Mansfield Township, Warren County600 ft
  11. Allamuchy600 ft
  12. Blairstown Township590 ft
  13. Marksboro580 ft
  14. Hackettstown570 ft
  15. Johnsonburg570 ft
  16. Oxford Township560 ft
  17. Oxford560 ft
  18. Knowlton Township530 ft
  19. Mountain Lake530 ft
  20. Anderson530 ft
  21. Great Meadows520 ft
  22. Port Colden520 ft
  23. Buttzville510 ft
  24. Mount Hermon510 ft
  25. Hope Township510 ft
  26. Washington470 ft
  27. Washington Township, Warren County470 ft
  28. Silver Lake, Warren County450 ft
  29. Harmony Township450 ft
  30. Hope440 ft
  31. White Township440 ft
  32. Brass Castle440 ft
  33. Harmony420 ft
  34. Upper Stewartsville390 ft
  35. Franklin Township, Warren County390 ft
  36. Lopatcong Township390 ft
  37. Asbury390 ft
  38. New Village370 ft
  39. Greenwich370 ft
  40. Blairstown370 ft
  41. Delaware Park360 ft
  42. Greenwich Township360 ft
  43. Bridgeville360 ft
  44. Broadway360 ft
  45. Hainesburg350 ft
  46. Lopatcong Overlook350 ft
  47. Stewartsville340 ft
  48. Brookfield330 ft
  49. Alpha320 ft
  50. Phillipsburg310 ft
  51. Columbia310 ft
  52. Delaware290 ft
  53. Belvidere290 ft
  54. Pohatcong Township290 ft
  55. Upper Pohatcong280 ft
  56. Brainards260 ft
  57. Hutchinson220 ft
  58. Finesville180 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.