Belvidere, NJ Elevation & Topographic Map

Elevation

390 ft 120 m350 ft 110 m330 ft 100 m290 ft 90 m250 ft 75 m230 ft 70 m

Contours every 100 ft, bold every 500 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Town area: Fades everything outside the official town limits (US Census).

Elevation Data

Belvidere sits at about 290 ft (85 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

290 ft 85 m

most residents: 260–320 ft

Lowest

230 ft 70 m

on the southwest side

Highest

390 ft 120 m

on the north edge, below higher ground just outside

Average

290 ft 90 m

all land inside town limits

Belvidere spans about 160 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	290 ft85 m
Highest point Inside town limits, on the north edge, below higher ground just outside	390 ft120 m
Lowest point Inside town limits, on the southwest side	230 ft70 m
Town center USGS map point for Belvidere	260 ft80 m
Average of all land	290 ft90 m

Elevation profile, west to east

1.4 mi west to east through the town center.

Topographic Map

Location: Town in Warren County, New Jersey, United States
Population: 2,545 2024 est.
Land area: 1.4 sq mi
Density: 1,756 per sq mi
Coordinates: 40.8298° N, 75.0777° W
Time zone: Eastern UTC−5 / −4
Landform region: Valley and Ridge
Drains to: Delaware River → Atlantic Ocean
ZIP codes 1: 07823

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in New Jersey198th highest of 941
Towns in Warren County53rd highest of 58

Peaks and hills nearest, by height

Scotts Mountain1,270 ft
Mount No More1,140 ft
Mount Mohepinoke1,140 ft
Oxford Mountain1,000 ft
High Rock Mountain950 ft

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.