Wicomico County, MD Elevation & Topographic Map

Topographic elevation map of Wicomico County, Maryland, shaded from sea level on Monie Bay to 190 ft near the middle
Elevation
190 ft 55 m140 ft 45 m120 ft 35 m71 ft 21 m23 ft 7 m0 ft 0 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Wicomico County averages about 31 ft (10 m) above sea level across all its land. Its ground runs from sea level on Monie Bay to 190 ft near the middle.

Average elevation
31 ft 10 m
all land inside the county
Highest
190 ft 55 m
near the middle
Lowest
0 ft 0 m
at sea level on Monie Bay

Wicomico County spans about 190 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land31 ft10 m
Highest point
Inside the county, near the middle
190 ft55 m
Lowest point
Where the land meets Monie Bay
0 ft0 m

Elevation profile, west to east

29 mi west to east through Salisbury.

Topographic Map

Topographic elevation map of Wicomico County, Maryland, shaded from sea level on Monie Bay to 190 ft near the middle
County boundary (dashed) over shaded terrain, with contours every 10 ft (3 m).
Location
County in Maryland, United States
Population
106,329 2024 est.
Land area
374.4 sq mi + 25.8 sq mi water
Density
284 per sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Coastal Plain
Drains to
Atlantic Ocean
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Neighboring counties sharing a border, by average

  1. Sussex County, DE32 ft
  2. Wicomico County31 ft
  3. Worcester County22 ft
  4. Dorchester County11 ft
  5. Somerset County10 ft

Rankings by average elevation

Peaks and hills highest inside

  • Ryles Hill30 ft
All 19 towns in Wicomico County by typical elevation
  1. Parsonsburg76 ft
  2. Pittsville48 ft
  3. Delmar48 ft
  4. Hebron39 ft
  5. Willards36 ft
  6. Fruitland35 ft
  7. Powellville33 ft
  8. Salisbury31 ft
  9. Mardela Springs24 ft
  10. Allen20 ft
  11. Sharptown16 ft
  12. Tyaskin16 ft
  13. Quantico13 ft
  14. Bivalve12 ft
  15. Nanticoke Acres9 ft
  16. Jesterville7 ft
  17. Waterview7 ft
  18. Nanticoke7 ft
  19. Whitehaven3 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, −2 ft at 38.3612° N, 75.8524° W, is in such a hollow or patch and is not counted; this coastal land's lowest point is sea level on the coast.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.