Somerset County, MD Elevation & Topographic Map

Topographic elevation map of Somerset County, Maryland, shaded from sea level on Pocomoke Sound to 53 ft on the northeast side
Elevation
53 ft 16 m40 ft 12 m33 ft 10 m20 ft 6 m7 ft 2 m0 ft 0 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Somerset County averages about 10 ft (3 m) above sea level across all its land. Its ground runs from sea level on Pocomoke Sound to 53 ft on the northeast side.

Average elevation
10 ft 3 m
all land inside the county
Highest
53 ft 16 m
on the northeast side
Lowest
0 ft 0 m
at sea level on Pocomoke Sound

Somerset County spans about 53 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land10 ft3 m
Highest point
Inside the county, on the northeast side
53 ft16 m
Lowest point
Where the land meets Pocomoke Sound
0 ft0 m

Elevation profile, west to east

22 mi west to east through Princess Anne.

Topographic Map

Topographic elevation map of Somerset County, Maryland, shaded from sea level on Pocomoke Sound to 53 ft on the northeast side
County boundary (dashed) over shaded terrain, with contours every 10 ft (3 m).
Location
County in Maryland, United States
Population
25,241 2024 est.
Land area
319.7 sq mi + 290.6 sq mi water
Density
79 per sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Coastal Plain 93%
Drains to
Atlantic Ocean
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Neighboring counties sharing a border, by average

  1. St. Mary's County76 ft
  2. Northumberland County, VA54 ft
  3. Wicomico County31 ft
  4. Worcester County22 ft
  5. Accomack County, VA16 ft
  6. Dorchester County11 ft
  7. Somerset County10 ft

Rankings by average elevation

Peaks and hills highest inside

  • Backbone Hill49 ft
  • Dunker Hill16 ft
All 11 towns in Somerset County by typical elevation
  1. Eden26 ft
  2. West Pocomoke18 ft
  3. Princess Anne15 ft
  4. Dames Quarter6 ft
  5. Mount Vernon5 ft
  6. Chance3 ft
  7. Crisfield3 ft
  8. Fairmount3 ft
  9. Smith Island2 ft
  10. Frenchtown-Rumbly1 ft
  11. Deal Island1 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, −11 ft at 38.2685° N, 75.6699° W, is in such a hollow or patch and is not counted; this coastal land's lowest point is sea level on the coast.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.