Sharptown, MD Elevation & Topographic Map
Elevation
33 ft 10 m25 ft 8 m21 ft 6 m13 ft 4 m5 ft 1 m1 ft 0 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Sharptown sits at about 16 ft (5 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
16 ft 5 m
most residents: 10–24 ft
Lowest
1 ft 0 m
near the middle
Highest
33 ft 10 m
on the southeast side
Average
18 ft 5 m
all land inside town limits
Sharptown spans about 32 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 16 ft5 m |
| Highest point Inside town limits, on the southeast side | 33 ft10 m |
| Lowest point Inside town limits, near the middle | 1 ft0 m |
| Town center USGS map point for Sharptown | 10 ft3 m |
| Average of all land | 18 ft5 m |
Topographic Map
- Location
- Town in Wicomico County, Maryland, United States
- Population
- 711 2024 est.
- Land area
- 0.4 sq mi
- Density
- 1,685 per sq mi
- Coordinates
- 38.5426° N, 75.7194° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Coastal Plain
- Drains to
- Nanticoke River → Atlantic Ocean
- ZIP codes 1
- 21861
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Hebron39 ft
- Seaford, DE28 ft
- Laurel, DE26 ft
- Mardela Springs24 ft
- Bethel, DE22 ft
- Brookview20 ft
- Blades, DE18 ft
- Sharptown16 ft
- Galestown12 ft
- Vienna10 ft
- Eldorado8 ft
Rankings by typical elevation
- Towns in Maryland480th highest of 536
- Towns in Wicomico County11th highest of 19
Peaks and hills nearest, by height
- Sand Hill13 ft
- Delia Hill11 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.