Logan County, KY Elevation & Topographic Map

Topographic elevation map of Logan County, Kentucky, shaded from 400 ft on the northwest side to 870 ft near the middle
Elevation
870 ft 265 m750 ft 230 m690 ft 210 m570 ft 175 m460 ft 140 m400 ft 120 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Logan County averages about 600 ft (180 m) above sea level across all its land. Its ground runs from 400 ft on the northwest side to 870 ft near the middle.

Average elevation
600 ft 180 m
all land inside the county
Highest
870 ft 265 m
near the middle
Lowest
400 ft 120 m
on the northwest side

Logan County spans about 470 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land600 ft180 m
Highest point
Inside the county, near the middle
870 ft265 m
Lowest point
Inside the county, on the northwest side
400 ft120 m

Elevation profile, south to north

29 mi south to north through Russellville.

Topographic Map

Topographic elevation map of Logan County, Kentucky, shaded from 400 ft on the northwest side to 870 ft near the middle
County boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
County in Kentucky, United States
Population
28,467 2024 est.
Land area
552.2 sq mi + 4.8 sq mi water
Density
52 per sq mi
Time zone
Central UTC−6 / −5
Landform region
Interior Low Plateaus
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 5 towns in Logan County by typical elevation
  1. Auburn650 ft
  2. Russellville610 ft
  3. Adairville600 ft
  4. Dunmor partly570 ft
  5. Lewisburg480 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.