Washington Township, Clark County, IN Elevation & Topographic Map

Elevation

770 ft 235 m690 ft 210 m640 ft 195 m560 ft 170 m480 ft 145 m440 ft 135 m

Contours every 200 ft, bold every 1,000 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Township area: Fades everything outside the official township boundaries (US Census).

Elevation Data

Washington Township, Clark County sits at about 710 ft (215 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

710 ft 215 m

most residents: 670–740 ft

Lowest

440 ft 135 m

on the southeast side

Highest

770 ft 235 m

on the northeast side

Average

700 ft 215 m

all land inside township boundaries

Washington Township, Clark County spans about 330 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	710 ft215 m
Highest point Inside township boundaries, on the northeast side	770 ft235 m
Lowest point Inside township boundaries, on the southeast side	440 ft135 m
Average of all land	700 ft215 m

Elevation profile, west to east

6.0 mi west to east through the middle of Washington Township, Clark County.

Topographic Map

Location: Township in Clark County, Indiana, United States
Population: 1,779 2024 est.
Land area: 35.2 sq mi + 0.1 sq mi water
Density: 51 per sq mi
Coordinates: 38.5674° N, 85.5487° W
Time zone: Eastern UTC−5 / −4
Landform region: Central Lowland
Drains to: Ohio River → Mississippi River → Gulf of America

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Indiana1,199th highest of 1,977
Towns in Clark County4th highest of 23

Peaks and hills nearest, by height

Silver Hills1,030 ft
Round Knob1,010 ft
Rock Knob960 ft
Pine Knob960 ft
Oak Knob940 ft

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); BTS time zones. All public domain.