Clark County, IN Elevation & Topographic Map

Topographic elevation map of Clark County, Indiana, shaded from 360 ft on the south side to 1,030 ft on Silver Hills
Elevation
1,030 ft 315 m870 ft 265 m780 ft 240 m620 ft 190 m450 ft 135 m360 ft 110 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Clark County averages about 620 ft (190 m) above sea level across all its land. Its ground runs from 360 ft on the south side to 1,030 ft on Silver Hills.

Average elevation
620 ft 190 m
all land inside the county
Highest
1,030 ft 315 m
on Silver Hills
Lowest
360 ft 110 m
on the south side

Clark County spans about 670 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land620 ft190 m
Highest point
Inside the county, on Silver Hills (3DEP terrain model; no NGS survey height)
1,030 ft315 m
Lowest point
Inside the county, on the south side
360 ft110 m

Elevation profile, south to north

23 mi south to north through Jeffersonville Township.

Topographic Map

Topographic elevation map of Clark County, Indiana, shaded from 360 ft on the south side to 1,030 ft on Silver Hills
County boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
County in Indiana, United States
Population
127,479 2024 est.
Land area
372.5 sq mi + 4.1 sq mi water
Density
342 per sq mi
Time zone
Eastern UTC−5 / −4
Landform regions
Central Lowland 52%, Interior Low Plateaus 48%
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 23 towns in Clark County by typical elevation
  1. Wood Township750 ft
  2. Owen Township, Clark County720 ft
  3. New Washington710 ft
  4. Washington Township, Clark County710 ft
  5. Otisco670 ft
  6. Oregon Township, Clark County660 ft
  7. Underwood610 ft
  8. Charlestown600 ft
  9. Charlestown Township590 ft
  10. Bethlehem Township, Clark County580 ft
  11. Monroe Township, Clark County570 ft
  12. Borden570 ft
  13. Henryville550 ft
  14. Carr Township540 ft
  15. Utica Township510 ft
  16. Memphis490 ft
  17. Union Township, Clark County490 ft
  18. Silver Creek Township490 ft
  19. Sellersburg490 ft
  20. Utica470 ft
  21. Jeffersonville470 ft
  22. Jeffersonville Township460 ft
  23. Clarksville460 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 310 ft at 38.3907° N, 85.7343° W, is in such a hollow or patch and is not counted.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.