Bethlehem Township, Clark County, IN Elevation & Topographic Map

Elevation

810 ft 250 m720 ft 220 m670 ft 205 m570 ft 175 m470 ft 145 m420 ft 130 m

Contours every 100 ft, bold every 500 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Township area: Fades everything outside the official township boundaries (US Census).

Elevation Data

Bethlehem Township, Clark County sits at about 580 ft (175 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

580 ft 175 m

most residents: 470–780 ft

Lowest

420 ft 130 m

on the southwest side

Highest

810 ft 250 m

on the northwest side

Average

680 ft 205 m

all land inside township boundaries

Bethlehem Township, Clark County spans about 390 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	580 ft175 m
Highest point Inside township boundaries, on the northwest side	810 ft250 m
Lowest point Inside township boundaries, on the southwest side	420 ft130 m
Town center USGS map point for Bethlehem Township, Clark County	470 ft145 m
Average of all land	680 ft205 m

Elevation profile, south to north

2.8 mi south to north through the town center.

Topographic Map

Location: Township in Clark County, Indiana, United States
Population: 377 2024 est.
Land area: 17.9 sq mi + 0.9 sq mi water
Density: 21 per sq mi
Coordinates: 38.5392° N, 85.4205° W
Time zone: Eastern UTC−5 / −4
Landform region: Interior Low Plateaus
Drains to: Ohio River → Mississippi River → Gulf of America

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Indiana1,653rd highest of 1,977
Towns in Clark County10th highest of 23

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); BTS time zones. All public domain.