Monroe Township, Pike County, IN Elevation & Topographic Map
Elevation
650 ft 200 m590 ft 180 m560 ft 170 m510 ft 155 m450 ft 135 m420 ft 130 m
Contours every 200 ft, bold every 1,000 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Township area
- Fades everything outside the official township boundaries (US Census).
Elevation Data
Monroe Township, Pike County sits at about 490 ft (150 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
490 ft 150 m
most residents: 430–540 ft
Lowest
420 ft 130 m
on the northwest side
Highest
650 ft 200 m
on the northeast side
Average
480 ft 145 m
all land inside township boundaries
Monroe Township, Pike County spans about 230 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 490 ft150 m |
| Highest point Inside township boundaries, on the northeast side | 650 ft200 m |
| Lowest point Inside township boundaries, on the northwest side | 420 ft130 m |
| Average of all land | 480 ft145 m |
Elevation profile, south to north
7.1 mi south to north through the middle of Monroe Township, Pike County.
Topographic Map
- Location
- Township in Pike County, Indiana, United States
- Population
- 628 2024 est.
- Land area
- 42.5 sq mi + 1.2 sq mi water
- Density
- 15 per sq mi
- Coordinates
- 38.2836° N, 87.2503° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Interior Low Plateaus
- Drains to
- Patoka River → Wabash River → Ohio River → Mississippi River → Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Stendal620 ft
- Lockhart Township540 ft
- Hart Township500 ft
- Arthur490 ft
- Spurgeon490 ft
- Monroe Township, Pike County490 ft
- Lynnville480 ft
- Somerville480 ft
- Patoka Township, Pike County470 ft
- Oakland City470 ft
- Columbia Township, Gibson County460 ft
Rankings by typical elevation
- Towns in Indiana1,840th highest of 1,977
- Towns in Pike County9th highest of 18
Peaks and hills nearest, by height
- Dyson Knob650 ft
- Wilson Hill620 ft
- Ringham Hill610 ft
- Moore Hill, Gibson County590 ft
- Turkey Hill, Pike County560 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 360 ft at 38.2446° N, 87.2896° W, is in such a hollow or patch and is not counted.
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); BTS time zones. All public domain.