Hart Township, IN Elevation & Topographic Map
Elevation
660 ft 200 m590 ft 180 m560 ft 170 m500 ft 150 m440 ft 135 m400 ft 125 m
Contours every 200 ft, bold every 1,000 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Township area
- Fades everything outside the official township boundaries (US Census).
Elevation Data
Hart Township sits at about 500 ft (150 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
500 ft 150 m
most residents: 460–600 ft
Lowest
400 ft 125 m
on the south side
Highest
660 ft 200 m
near the middle
Average
490 ft 150 m
all land inside township boundaries
Hart Township spans about 260 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 500 ft150 m |
| Highest point Inside township boundaries, near the middle | 660 ft200 m |
| Lowest point Inside township boundaries, on the south side | 400 ft125 m |
| Average of all land | 490 ft150 m |
Elevation profile, south to north
7.7 mi south to north through the middle of Hart Township.
Topographic Map
- Location
- Township in Warrick County, Indiana, United States
- Population
- 1,622 2024 est.
- Land area
- 41.2 sq mi + 0.8 sq mi water
- Density
- 39 per sq mi
- Coordinates
- 38.2013° N, 87.2940° W
- Time zone
- Central UTC−6 / −5
- Landform region
- Interior Low Plateaus
- Drains to
- Pigeon Creek → Ohio River → Mississippi River → Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Hart Township500 ft
- Spurgeon490 ft
- Monroe Township, Pike County490 ft
- Lane Township480 ft
- Lynnville480 ft
- Somerville480 ft
- Owen Township, Warrick County460 ft
- Barton Township450 ft
- Mackey450 ft
- Greer Township440 ft
- Buckskin430 ft
Rankings by typical elevation
- Towns in Indiana1,814th highest of 1,977
- Towns in Warrick Countyhighest of 17
Peaks and hills nearest, by height
- Dyson Knob650 ft
- Big Ditney Hill640 ft
- Wilson Hill620 ft
- Ringham Hill610 ft
- Lost Hill460 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 370 ft at 38.1776° N, 87.2974° W, is in such a hollow or patch and is not counted.
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); BTS time zones. All public domain.