Pleasants County, WV Elevation & Topographic Map
Elevation
1,250 ft 380 m1,080 ft 330 m1,000 ft 305 m830 ft 255 m670 ft 205 m580 ft 180 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Pleasants County averages about 880 ft (270 m) above sea level across all its land. Its ground runs from 580 ft on the west side to 1,250 ft on the south side.
Average elevation
880 ft 270 m
all land inside the county
Highest
1,250 ft 380 m
on the south side
Lowest
580 ft 180 m
on the west side
Pleasants County spans about 670 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 880 ft270 m |
| Highest point Inside the county, on the south side | 1,250 ft380 m |
| Lowest point Inside the county, on the west side | 580 ft180 m |
Elevation profile, south to north
7.1 mi south to north through St. Marys.
Topographic Map
- Location
- County in West Virginia, United States
- Population
- 7,358 2024 est.
- Land area
- 130.1 sq mi + 4.4 sq mi water
- Density
- 57 per sq mi
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Appalachian Plateaus
- Drains to
- Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Ritchie County950 ft
- Tyler County950 ft
- Pleasants County880 ft
- Washington County, OH820 ft
- Wood County790 ft
Rankings by average elevation
- Counties in West Virginia46th highest of 55
- Counties in the United States1,640th highest of 3,151
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.