Trent, TX Elevation & Topographic Map

Elevation

1,930 ft 590 m1,930 ft 585 m1,920 ft 585 m1,910 ft 585 m1,910 ft 580 m1,900 ft 580 m

Contours every 40 ft, bold every 200 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Town area: Fades everything outside the official town limits (US Census).

Elevation Data

Trent sits at about 1,910 ft (585 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

1,910 ft 585 m

most residents: 1,910–1,920 ft

Lowest

1,900 ft 580 m

on the east side

Highest

1,920 ft 585 m

on the south side

Average

1,910 ft 585 m

all land inside town limits

Trent is nearly flat: its ground varies by only about 20 ft, so the figures below sit close together.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	1,910 ft585 m
Highest point Inside town limits, on the south side	1,920 ft585 m
Lowest point Inside town limits, on the east side	1,900 ft580 m
Town center USGS map point for Trent	1,920 ft585 m
Average of all land	1,910 ft585 m

Topographic Map

Location: Town in Taylor County, Texas, United States
Population: 295 2024 est.
Land area: 0.4 sq mi
Density: 730 per sq mi
Coordinates: 32.4896° N, 100.1265° W
Time zone: Central UTC−6 / −5
Landform region: Central Lowland
Drains to: Clear Fork Brazos River → Brazos River → Gulf of America
ZIP codes 1: 79561

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Sweetwater2,140 ft
Roby1,970 ft
Trent1,910 ft
Buffalo Gap1,900 ft
McCaulley1,890 ft
Merkel1,870 ft
Sylvester1,850 ft
Tye1,800 ft
Anson1,720 ft
Impact1,670 ft
Hawley1,640 ft

Rankings by typical elevation

Towns in Texas237th highest of 1,861
Towns in Taylor County2nd highest of 9

Peaks and hills nearest, by height

Ringtop2,450 ft
Black Point2,440 ft
Chalk Peak2,360 ft
Blowout Mountain2,250 ft
Spears Mountain2,210 ft

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.