Rule, TX Elevation & Topographic Map

Elevation
1,710 ft 520 m1,700 ft 520 m1,700 ft 515 m1,690 ft 515 m1,680 ft 510 m1,680 ft 510 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Rule sits at about 1,680 ft (515 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
1,680 ft 515 m
most residents: 1,680–1,690 ft
Lowest
1,680 ft 510 m
on the east side
Highest
1,690 ft 515 m
on the west side
Average
1,680 ft 515 m
all land inside town limits
Rule is nearly flat: its ground varies by only about 10 ft, so the figures below sit close together.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 1,680 ft515 m |
| Highest point Inside town limits, on the west side | 1,690 ft515 m |
| Lowest point Inside town limits, on the east side | 1,680 ft510 m |
| Town center USGS map point for Rule | 1,680 ft510 m |
| Average of all land | 1,680 ft515 m |
Topographic Map
- Location
- Town in Haskell County, Texas, United States
- Population
- 561 2024 est.
- Land area
- 0.7 sq mi
- Density
- 805 per sq mi
- Coordinates
- 33.1845° N, 99.8937° W
- Time zone
- Central UTC−6 / −5
- Landform region
- Central Lowland
- Drains to
- Closed basin (does not reach the sea)
- ZIP codes 1
- 79547
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
Rankings by typical elevation
- Towns in Texas272nd highest of 1,861
- Towns in Haskell Countyhighest of 5
Peaks and hills nearest, by height
- Kiowa Peak1,830 ft
- Davidson Peak1,810 ft
- Frog Mountain1,730 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.