Rosebud, TX Elevation & Topographic Map

Elevation
420 ft 130 m410 ft 125 m410 ft 125 m400 ft 120 m390 ft 120 m390 ft 120 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- City area
- Fades everything outside the official city limits (US Census).
Elevation Data
Rosebud sits at about 410 ft (125 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
410 ft 125 m
most residents: 390–410 ft
Lowest
390 ft 120 m
on the west side
Highest
420 ft 130 m
on the northeast side
Average
400 ft 125 m
all land inside city limits
Rosebud spans about 30 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 410 ft125 m |
| Highest point Inside city limits, on the northeast side | 420 ft130 m |
| Lowest point Inside city limits, on the west side | 390 ft120 m |
| Town center USGS map point for Rosebud | 400 ft120 m |
| Average of all land | 400 ft125 m |
Topographic Map
- Location
- City in Falls County, Texas, United States
- Population
- 1,341 2024 est.
- Land area
- 0.8 sq mi
- Density
- 1,668 per sq mi
- Coordinates
- 31.0730° N, 96.9786° W
- Time zone
- Central UTC−6 / −5
- Landform region
- Coastal Plain
- Drains to
- Brazos River → Gulf of America
- ZIP codes 1
- 76570
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Lott540 ft
- Rogers540 ft
- Buckholts500 ft
- Bremond460 ft
- Chilton440 ft
- Burlington440 ft
- Rosebud410 ft
- Cameron400 ft
- Marlin400 ft
- Ben Arnold380 ft
- Calvert330 ft
Rankings by typical elevation
- Towns in Texas1,089th highest of 1,861
- Towns in Falls County4th highest of 5
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the city limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census city limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.