Ropesville, TX Elevation & Topographic Map

Topographic elevation map of Ropesville, Texas, shaded from 3,350 ft on the south side to 3,370 ft on the northwest side
Elevation
3,380 ft 1,030 m3,370 ft 1,030 m3,370 ft 1,025 m3,360 ft 1,025 m3,350 ft 1,020 m3,350 ft 1,020 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
City area
Fades everything outside the official city limits (US Census).

Elevation Data

Ropesville sits at about 3,360 ft (1,025 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation
3,360 ft 1,025 m
most residents: 3,360–3,370 ft
Lowest
3,350 ft 1,020 m
on the south side
Highest
3,370 ft 1,025 m
on the northwest side
Average
3,360 ft 1,025 m
all land inside city limits

Ropesville is nearly flat: its ground varies by only about 20 ft, so the figures below sit close together.

FigureElevation
Typical
Where people live: half of residents higher, half lower
3,360 ft1,025 m
Highest point
Inside city limits, on the northwest side
3,370 ft1,025 m
Lowest point
Inside city limits, on the south side
3,350 ft1,020 m
Town center
USGS map point for Ropesville
3,360 ft1,025 m
Airport (T96)
FAA airport elevation, the highest point of its runways, 8.1 mi east of the city limits
3,265 ft995 m
Average of all land3,360 ft1,025 m

Altitude Effects

What 3,360 ft means day to day, worked out from the typical elevation.

Water boils at
205.8 °F96.5 °C

vs 212 °F at sea level; USDA: food takes longer to cook.

Air pressure
88% of sea level

26.5 inHg (89.6 kPa): each breath holds 12% less air.

Oxygen equivalent
18.5% at sea level

Air is still 21% oxygen, just thinner. Normal at the coast: 20.9%.

Sunburn
+7% more UV

EPA: UV rises about 2% for every 1,000 ft.

Topographic Map

Topographic elevation map of Ropesville, Texas, shaded from 3,350 ft on the south side to 3,370 ft on the northwest side
City limits (dashed) over shaded terrain, with contours every 10 ft (3 m).
Location
City in Hockley County, Texas, United States
Population
453 2024 est.
Land area
0.4 sq mi
Density
1,248 per sq mi
Coordinates
33.4134° N, 102.1543° W
Time zone
Central UTC−6 / −5
Landform region
Great Plains
Drains to
Closed basin (does not reach the sea)
Airport
Southwest Lubbock (T96) 3,265 ft
ZIP codes 1
79358
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

Nearby Places

How we measure
  • Typical elevation: the population-weighted median: every 2020 Census block inside the city limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census city limits (TIGER, Jan 1 2026).
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Altitude effects: standard-atmosphere formulas applied to the typical elevation; UV from EPA's rule of thumb (about 2% per 1,000 ft).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.