Milam County, TX Elevation & Topographic Map
Elevation
650 ft 200 m540 ft 165 m490 ft 150 m380 ft 115 m270 ft 85 m220 ft 65 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Milam County averages about 410 ft (125 m) above sea level across all its land. Its ground runs from 220 ft on the east side to 650 ft on Taylor Mountain.
Average elevation
410 ft 125 m
all land inside the county
Highest
650 ft 200 m
on Taylor Mountain
Lowest
220 ft 65 m
on the east side
Milam County spans about 430 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 410 ft125 m |
| Highest point Inside the county, on Taylor Mountain (3DEP terrain model; no NGS survey height) | 650 ft200 m |
| Lowest point Inside the county, on the east side | 220 ft65 m |
Elevation profile, west to east
28 mi west to east through Rockdale.
Topographic Map
- Location
- County in Texas, United States
- Population
- 26,159 2024 est.
- Land area
- 1,016.4 sq mi + 4.6 sq mi water
- Density
- 26 per sq mi
- Time zone
- Central UTC−6 / −5
- Landform region
- Coastal Plain
- Drains to
- Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Williamson County760 ft
- Bell County670 ft
- Falls County430 ft
- Lee County410 ft
- Milam County410 ft
- Robertson County380 ft
- Burleson County320 ft
Rankings by average elevation
- Counties in Texas180th highest of 254
- Counties in the United States2,463rd highest of 3,151
Peaks and hills highest inside
- Taylor Mountain, Milam County650 ft
- Hart Mountain630 ft
- Wilson Hill, Milam County540 ft
- Eland Rough520 ft
- Long Mountain, Milam County490 ft
All 9 towns in Milam County by typical elevation
- Buckholts500 ft
- Milano490 ft
- Rockdale480 ft
- Thorndale450 ft
- Praesel450 ft
- Burlington440 ft
- Cameron400 ft
- Ben Arnold380 ft
- Gause380 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.