Jasper County, TX Elevation & Topographic Map

Topographic elevation map of Jasper County, Texas, shaded from 5 ft on the south side to 580 ft on the northeast side
Elevation
580 ft 180 m440 ft 135 m370 ft 110 m220 ft 70 m78 ft 24 m5 ft 2 m
Zoom in for contour lines
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Jasper County averages about 160 ft (50 m) above sea level across all its land. Its ground runs from 5 ft on the south side to 580 ft on the northeast side.

Average elevation
160 ft 50 m
all land inside the county
Highest
580 ft 180 m
on the northeast side
Lowest
5 ft 2 m
on the south side

Jasper County spans about 575 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land160 ft50 m
Highest point
Inside the county, on the northeast side
580 ft180 m
Lowest point
Inside the county, on the south side
5 ft2 m

Elevation profile, south to north

62 mi south to north through Jasper.

Topographic Map

Topographic elevation map of Jasper County, Texas, shaded from 5 ft on the south side to 580 ft on the northeast side
County boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
County in Texas, United States
Population
32,907 2024 est.
Land area
938.7 sq mi + 31.0 sq mi water
Density
35 per sq mi
Time zone
Central UTC−6 / −5
Landform region
Coastal Plain
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 6 towns in Jasper County by typical elevation
  1. Jasper240 ft
  2. Browndell230 ft
  3. Sam Rayburn210 ft
  4. Kirbyville110 ft
  5. Buna73 ft
  6. Evadale40 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.