Hawkins County, TN Elevation & Topographic Map

Topographic elevation map of Hawkins County, Tennessee, shaded from 1,050 ft on the west side to 3,114 ft on Chimneytop Mountain
Elevation
3,110 ft 950 m2,600 ft 790 m2,340 ft 715 m1,820 ft 555 m1,310 ft 400 m1,050 ft 320 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Hawkins County averages about 1,430 ft (435 m) above sea level across all its land. Its ground runs from 1,050 ft on the west side to 3,114 ft on Chimneytop Mountain.

Average elevation
1,430 ft 435 m
all land inside the county
Highest
3,114 ft 949 m
on Chimneytop Mountain
Lowest
1,050 ft 320 m
on the west side

Hawkins County spans about 2,060 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land1,430 ft435 m
Highest point
Inside the county, on Chimneytop Mountain (NGS survey height)
3,114 ft949 m
Lowest point
Inside the county, on the west side
1,050 ft320 m

Elevation profile, south to north

13 mi south to north through Church Hill.

Topographic Map

Topographic elevation map of Hawkins County, Tennessee, shaded from 1,050 ft on the west side to 3,114 ft on Chimneytop Mountain
County boundary (dashed) over shaded terrain, with contours every 100 ft (30 m).
Location
County in Tennessee, United States
Population
59,371 2024 est.
Land area
487.1 sq mi + 12.6 sq mi water
Density
122 per sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Valley and Ridge
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 8 towns in Hawkins County by typical elevation
  1. Mount Carmel1,390 ft
  2. Rogersville1,340 ft
  3. Kingsport partly1,330 ft
  4. Church Hill1,320 ft
  5. Surgoinsville1,250 ft
  6. Bulls Gap1,170 ft
  7. Bean Station partly1,140 ft
  8. Mooresburg1,130 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.