Somerset County, PA Elevation & Topographic Map

Topographic elevation map of Somerset County, Pennsylvania, shaded from 1,040 ft on the southeast side to 3,210 ft on Mount Davis
Elevation
3,210 ft 980 m2,670 ft 815 m2,400 ft 730 m1,850 ft 565 m1,310 ft 400 m1,040 ft 315 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Somerset County averages about 2,200 ft (670 m) above sea level across all its land. Its ground runs from 1,040 ft on the southeast side to 3,210 ft on Mount Davis.

Average elevation
2,200 ft 670 m
all land inside the county
Highest
3,210 ft 980 m
on Mount Davis
Lowest
1,040 ft 315 m
on the southeast side

Somerset County spans about 2,170 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land2,200 ft670 m
Highest point
Inside the county, on Mount Davis
3,210 ft980 m
Lowest point
Inside the county, on the southeast side
1,040 ft315 m

Elevation profile, west to east

29 mi west to east through Somerset Township.

Topographic Map

Topographic elevation map of Somerset County, Pennsylvania, shaded from 1,040 ft on the southeast side to 3,210 ft on Mount Davis
County boundary (dashed) over shaded terrain, with contours every 200 ft (61 m).
Location
County in Pennsylvania, United States
Population
72,134 2024 est.
Land area
1,075.0 sq mi + 6.6 sq mi water
Density
67 per sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Appalachian Plateaus
Drains to
Gulf of America 79%, Atlantic Ocean 21%
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 56 towns in Somerset County by typical elevation
  1. Seven Springs2,620 ft
  2. Greenville Township2,590 ft
  3. Ogle Township2,530 ft
  4. Larimer Township2,440 ft
  5. Stonycreek Township, Somerset County2,340 ft
  6. Indian Lake2,340 ft
  7. Elk Lick Township2,330 ft
  8. Brothersvalley Township2,320 ft
  9. Berlin2,310 ft
  10. Shade Township2,280 ft
  11. Allegheny Township, Somerset County2,270 ft
  12. Jefferson Township, Somerset County2,240 ft
  13. Shanksville2,230 ft
  14. Somerset Township2,220 ft
  15. Northampton Township, Somerset County2,220 ft
  16. Cairnbrook2,220 ft
  17. Central City2,190 ft
  18. Summit Township, Somerset County2,180 ft
  19. Black Township2,150 ft
  20. Somerset2,130 ft
  21. New Centerville2,130 ft
  22. Salisbury2,110 ft
  23. Friedens2,100 ft
  24. Lincoln Township2,100 ft
  25. Milford Township, Somerset County2,080 ft
  26. Middlecreek Township, Somerset County2,060 ft
  27. Paint Township2,030 ft
  28. Upper Turkeyfoot Township2,030 ft
  29. Addison2,030 ft
  30. Edie2,020 ft
  31. Stoystown2,010 ft
  32. Meyersdale2,000 ft
  33. Quemahoning Township1,980 ft
  34. Jenner Township1,940 ft
  35. Addison Township1,930 ft
  36. Garrett1,930 ft
  37. Jennerstown1,910 ft
  38. Boswell1,890 ft
  39. Acosta1,860 ft
  40. Rockwood1,850 ft
  41. Gray1,840 ft
  42. Jerome1,830 ft
  43. Lower Turkeyfoot Township1,810 ft
  44. Davidsville1,810 ft
  45. Casselman1,790 ft
  46. Southampton Township, Somerset County1,780 ft
  47. Conemaugh Township1,770 ft
  48. Windber1,740 ft
  49. Fairhope Township1,730 ft
  50. Hooversville1,710 ft
  51. Paint1,690 ft
  52. Benson1,600 ft
  53. New Baltimore1,430 ft
  54. Ursina1,370 ft
  55. Confluence1,330 ft
  56. Wellersburg1,300 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.