Bedford County, PA Elevation & Topographic Map

Elevation
3,150 ft 960 m2,540 ft 775 m2,240 ft 680 m1,630 ft 495 m1,020 ft 310 m720 ft 220 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Bedford County averages about 1,460 ft (445 m) above sea level across all its land. Its ground runs from 720 ft on the south side to 3,150 ft on Blue Knob.
Average elevation
1,460 ft 445 m
all land inside the county
Highest
3,150 ft 960 m
on Blue Knob
Lowest
720 ft 220 m
on the south side
Bedford County spans about 2,430 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 1,460 ft445 m |
| Highest point Inside the county, on Blue Knob (3DEP terrain model; no NGS survey height) | 3,150 ft960 m |
| Lowest point Inside the county, on the south side | 720 ft220 m |
Elevation profile, south to north
39 mi south to north through Bedford Township.
Topographic Map
- Location
- County in Pennsylvania, United States
- Population
- 47,643 2024 est.
- Land area
- 1,012.0 sq mi + 4.6 sq mi water
- Density
- 47 per sq mi
- Time zone
- Eastern UTC−5 / −4
- Landform regions
- Valley and Ridge 84%, Appalachian Plateaus 16%
- Drains to
- Atlantic Ocean
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Somerset County2,200 ft
- Cambria County1,940 ft
- Blair County1,510 ft
- Bedford County1,460 ft
- Allegany County, MD1,250 ft
- Huntingdon County1,150 ft
- Fulton County1,120 ft
Rankings by average elevation
- Counties in Pennsylvania19th highest of 66
- Counties in the United States876th highest of 3,151
Peaks and hills highest inside
- Blue Knob3,150 ft
- Martin Hill2,770 ft
- Wills Mountain2,770 ft
- Savage Mountain, Bedford County2,680 ft
- Evitts Mountain2,630 ft
All 44 towns in Bedford County by typical elevation
- Wood partly1,860 ft
- Pavia Township1,730 ft
- Lincoln Township, Bedford County1,590 ft
- Juniata Township, Bedford County1,570 ft
- Bloomfield Township, Bedford County1,510 ft
- Broad Top Township1,470 ft
- West St. Clair Township1,440 ft
- Clearville1,440 ft
- Napier Township1,430 ft
- Kimmel Township1,420 ft
- Monroe Township, Bedford County1,400 ft
- Harrison Township, Bedford County1,400 ft
- Colerain Township, Bedford County1,400 ft
- Rainsburg1,390 ft
- Woodbury Township, Bedford County1,360 ft
- Southampton Township, Bedford County1,350 ft
- South Woodbury Township1,340 ft
- Cumberland Valley Township1,320 ft
- King Township1,320 ft
- East Providence Township1,290 ft
- Woodbury1,290 ft
- New Paris1,280 ft
- Schellsburg1,240 ft
- St. Clairsville1,240 ft
- Pleasantville, Bedford County1,230 ft
- Bedford Township1,210 ft
- East St. Clair Township1,200 ft
- Snake Spring Township1,190 ft
- West Providence Township1,180 ft
- Londonderry Township, Bedford County1,160 ft
- Manns Choice1,150 ft
- Hopewell Township, Bedford County1,140 ft
- Coaldale, Bedford County1,130 ft
- Bedford1,090 ft
- Earlston1,080 ft
- Everett1,060 ft
- Mann Township1,020 ft
- Defiance1,010 ft
- Liberty Township, Bedford County980 ft
- Riddlesburg980 ft
- Hyndman940 ft
- Hopewell890 ft
- Saxton880 ft
- Stonerstown870 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.