Harmony, PA Elevation & Topographic Map
Elevation
1,070 ft 325 m1,030 ft 315 m1,000 ft 305 m960 ft 295 m910 ft 280 m890 ft 270 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Borough area
- Fades everything outside the official borough limits (US Census).
Elevation Data
Harmony sits at about 970 ft (295 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
970 ft 295 m
most residents: 910–1,000 ft
Lowest
890 ft 270 m
on the northwest side
Highest
1,070 ft 325 m
on the south side
Average
950 ft 290 m
all land inside borough limits
Harmony spans about 180 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 970 ft295 m |
| Highest point Inside borough limits, on the south side | 1,070 ft325 m |
| Lowest point Inside borough limits, on the northwest side | 890 ft270 m |
| Town center USGS map point for Harmony | 930 ft285 m |
| Airport (PJC) FAA airport elevation, the highest point of its runways, 1.5 mi west of the borough limits | 907 ft276 m |
| Average of all land | 950 ft290 m |
Elevation profile, south to north
1.0 mi south to north through the town center.
Topographic Map
- Location
- Borough in Butler County, Pennsylvania, United States
- Population
- 918 2024 est.
- Land area
- 0.4 sq mi
- Density
- 2,330 per sq mi
- Coordinates
- 40.8015° N, 80.1273° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Appalachian Plateaus
- Drains to
- Ohio River → Mississippi River → Gulf of America
- Airport
- Zelienople Municipal (PJC) 907 ft
- ZIP codes 1
- 16037
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Connoquenessing1,270 ft
- Lancaster Township, Butler County1,190 ft
- Forward Township1,140 ft
- Marion Township, Beaver County1,130 ft
- Jackson Township, Butler County1,110 ft
- Franklin Township, Beaver County1,000 ft
- Evans City980 ft
- Harmony970 ft
- Zelienople960 ft
- Unionville, Beaver County950 ft
- Hazen910 ft
Rankings by typical elevation
- Towns in Pennsylvania1,797th highest of 3,545
- Towns in Butler County70th highest of 71
Peaks and hills nearest, by height
- Big Knob, Beaver County1,380 ft
- Fletcher Hill1,330 ft
- Turkey Hill, Lawrence County1,330 ft
- Steffens Hill1,290 ft
- Fridays Hill1,260 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the borough limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census borough limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.