Unionville, Beaver County, PA Elevation & Topographic Map

Elevation
1,210 ft 370 m1,140 ft 345 m1,100 ft 335 m1,030 ft 315 m960 ft 290 m920 ft 280 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official CDP boundary (US Census).
Elevation Data
Unionville, Beaver County sits at about 950 ft (290 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
950 ft 290 m
most residents: 930–970 ft
Lowest
920 ft 280 m
on the northwest side
Highest
1,210 ft 370 m
on the northwest side
Average
1,000 ft 305 m
all land inside the CDP boundary
Unionville, Beaver County spans about 290 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 950 ft290 m |
| Highest point Inside the CDP boundary, on the northwest side | 1,210 ft370 m |
| Lowest point Inside the CDP boundary, on the northwest side | 920 ft280 m |
| Town center USGS map point for Unionville, Beaver County | 980 ft295 m |
| Airport (PJC) FAA airport elevation, the highest point of its runways, 4.4 mi northeast of the CDP boundary | 907 ft276 m |
| Average of all land | 1,000 ft305 m |
Elevation profile, west to east
1.0 mi west to east through the town center.
Topographic Map
- Location
- Unincorporated community (census-designated place) in Beaver County, Pennsylvania, United States
- Population
- 180 2020 Census
- Land area
- 0.5 sq mi
- Density
- 342 per sq mi
- Coordinates
- 40.7453° N, 80.2076° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Appalachian Plateaus
- Drains to
- Ohio River → Mississippi River → Gulf of America
- Airport
- Zelienople Municipal (PJC) 907 ft
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Marion Township, Beaver County1,130 ft
- New Sewickley Township1,120 ft
- Daugherty Township1,120 ft
- Rochester Township1,020 ft
- Pine Run1,000 ft
- Zelienople960 ft
- Unionville, Beaver County950 ft
- Pulaski Township, Beaver County920 ft
- Rochester850 ft
- East Rochester820 ft
- Freedom790 ft
Rankings by typical elevation
- Towns in Pennsylvania1,837th highest of 3,545
- Towns in Beaver County34th highest of 58
Peaks and hills nearest, by height
- Big Knob, Beaver County1,380 ft
- Turkey Hill, Lawrence County1,330 ft
- Steffens Hill1,290 ft
- Fridays Hill1,260 ft
- Bunker Hill, Beaver County1,240 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Unionville, Beaver County is an unincorporated community; figures cover the census-designated place, a statistical area.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas); FAA airport data; BTS time zones. All public domain.